Factory Lockers worked when needed.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 14, 2005
Threads
16
Messages
228
Location
Waynesboro, VA, USA
Website
www.overlandexperts.com
Just thought I would chime in on the periodic factory locker discussion.

When driving gravel back roads I frequently shift to Low Range and try to engage my front and rear lockers just to "exercise" them. They do not always engage. I listen for the "click" as they engage and disengage as well as watching for the indicator light to stop flashing. Sometimes they go and sometimes they don't.

I figured they were just one more item on the list of projects.

Then, last week, my brother and I ran a local trail that has a bunch of shallow water crossings with some mildly gnarly exit climbs. Got a bit jammed on one of them and wheels started spinning. I reached down and turned on the rear locker for grins and "snik" she locked right up and the cruiser walked right out of the jam. So I ttried the front too and "snik" no hesitation at all. For the rest of the run I could switch 'em on and off at will.

I'm not saying they don't still need some TLC at some point, but maybe you just gotta REALLY use 'em to get ' em working the way they're supposed to work.

Got some photos in the Trails section if anybody is interested. Not real hard core, but cruisers in the woods is all good. :flipoff2:
 
You'd be surprised how well they lock and unlock when the conditions are super slippery :cool:

They seem to work very quickly when the opposing wheels see a difference of a full rotation or two...

Sumthin you can't really do on any road surface or even loose gravel :doh:

But lift a wheel on the rocks or hit some mud and snow and you'll see how fast they work :cool:
 
Back
Top Bottom