F fuel pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

the only difference in some of the pumps is the fittings i have used 2 f pumps on f engines and the other way around .you can use the newer pump and change the fittings .i think in 79 or so they went to press in fittings .on some pumps you have to plug the return line .wish i had part nos or photos .maybey the specter catalog would be of help
 
I'll let Man-a-Fre know. His old suppliers, mainly Aisin and Toyota dropped them. Napa, Orielly, Rock auto and Autozone say they're unavailable.

Specter seems to have backstock but I was hoping there was other options to this price

Page 028 Land Cruiser Fuel Pumps, Fuel Lines, Fuel Filters
 
Check Cruiser Corp, I bought one from them a few months ago.
 
Not to hijack the thread, but what changed in 1979? Why do all the suppliers seem to offer '58-'77 pumps, some seem to offer a '78 pump, but nobody offers a '79. What was different about the fuel pump on a '79 equipped with a 2F engine?

I'm curious mainly about US spec vehicles--according to Toyo DIY, it looks like all of the FJ series trucks sold for the "General", "Australia" and "Europe" markets from 1975 to 1980 used the same fuel pump, (23100-61030) which apparently might still be available for just under $100.00. Will one of those fit on a US spec truck?
 
Last edited:
79 had the fittings rotated on the housing to clear the oil cooler and a return line fitting . in 79 they may have went to the smaller mini truck style pump that requires a spacer or the arm will break off thats all i know about them
 
I'll let Man-a-Fre know. His old suppliers, mainly Aisin and Toyota dropped them. Napa, Orielly, Rock auto and Autozone say they're unavailable.

Specter seems to have backstock but I was hoping there was other options to this price

Page 028 Land Cruiser Fuel Pumps, Fuel Lines, Fuel Filters
Hey dave,
I just bought a new fuel pump from Toyota for my 1973 FJ40. Do you know if the two fittings (in and out) that screw into the pump housing have thread sealer on them or do I need to put some on there? I hate to unscrew them if I dont need to.... Thanks
 
.
 
I would hope, if Toyota built it, and sells it as a bolt on, it is ready to go
That’s what I thought. The dealership service department did not know the answer either... wow!
 
Back
Top Bottom