Engine identfication help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 3, 2016
Threads
9
Messages
271
Location
Washington
I'm a Landcruisers newb, Can you guys help me identify the model of the this engine, it's in my 71' FJ40...I believe it is the original motor. I just got it home and the motor turns over good, just need a cap, rotor, and coil and we can probably have it running today...thanks in advance!
 
IMG_20191008_133538183.webp
 
Looks like a 2F to me. 4 freeze plugs on the driver's side of the block, oil filter on the passenger side, and the pcv valve connection way back on the side cover.

Could be original distributor, since it has an octane selector.
 
Thanks fellas I knew you could helped me out! I think I'd prefer having the 2F motor, should be an upgrade over stock correct? So the distributors will interchange between the older F1 motors?
 
Yes they interchange ... yours is Vac. Advance so that’s a plus ... some are vac retard

Who ever changed it over missed a tooth or s few on the dizzy ... it’s right up against the block
Yes we noticed that too, you wouldn't happen to know the fire order, also when dropping in the dizzy which cylinder should be top dead center? Thanks...motor looks to be in good shape over all, turns over nicely no sludge buildup under the valve cover, we didn't do a compression check but it feels pretty good... where hoping for the best, lol!
 
#1 at TDC on the compression stroke when you install the distributor. Vacuum advance distributor requires ported vacuum at the carburetor, your '71 carburetor won't have the port. It would be just forward (valve cover side of carburetor) of the idle mixture screw. Your carburetor has a flat boss at ~30* from the idle mixture screw, but no port.
 
Engine ID stamp is here.

Eng Stamp.webp
 
This may help.

Valve Adjust.webp
 
Thanks for all the help guys I really appreciate it. I bought this 71' and a parts rig last December and moved it from the farm where I bought it to my sister's house where it sat for the last 10 mths so I'm pretty excited to finally get it home and start working on it! The 71' rolled off the line in May so it's exactly one month older than I am which is pretty cool I think! I'll check those cast numbers tomorrow and see what year the motor is and post up what i find. I saw the numbers that Steamer referred to, I should have taken a pic of them. I'll more than likely start a build thread soon, thanks again for sharing all the knowledge!
 
Back
Top Bottom