Early Piggy Brake Booster spacer?

[scrapdaddy]

Skullyota,

That is a good idea. I'll try that next time.

 

[Toyo_Judson]

I've got my aluminum spacer done, I just need to auger out the center hole. I am not center punching the original so I can keep from running into the intake with the booster and the right side bolts into the bend in the firewall, but I have a plan to keep the brake pedal from seeing the offset...

I'll post up pics when complete.

 

[LAMBCRUSHER]

I suppose an offset rod would do the trick...

 

[Toyo_Judson]

I suppose an offset rod would do the trick...

It would but I have a different plan. . .

 

[Toyo_Judson]

The bracket worked great! Looks like it will be fine inside from a left to right stand point with the pedal. I may need to do something with the throttle cable though, just change the angle a bit as it is pretty tight bend to it, but it still operates without binding.

I would move the groove for the rib about 3/32" over to get a little more room for the nuts inside against the inner firewall bracket support.

 

[Toyo_Judson]

For the edification of the Knights owning a '68 or '69 Piggy with the brace between the Clutch & Brake M/Cs

Here are the dimensions of the mock up I used...
For reference only...
YMMV...

 

[LAMBCRUSHER]

good work! nice tech...

 

[Peters Moose]

Well done!!

 

[PabloCruise]

For the edification of the Knights owning a '68 or '69 Piggy with the brace between the Clutch & Brake M/Cs

Here are the dimensions of the mock up I used...
For reference only...
YMMV...

View attachment 1132458

View attachment 1132459

That is so nice!

 

[Toyo_Judson]

Thanks guys, just hoping to help someone else out down the road... That and I am going to need all the good "Cruiser Karma" I can get...