e-locker difficult to disengage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 7, 2013
Threads
172
Messages
1,357
Location
central Fl
i took my 1995 rear oem e-locker apart to inspect. it all looked realy good and clean so i put it all back together. now the darn thing wont disengage unless i jack up the rear off the ground to take the wt off. what did i mess up? the front e locker works like a champ.. engages and disengages immediately.
 
Last edited:
yes yes, figure 8, reverse, etc. wont come un locked unless I jack up one wheel and move the wheel. then it releases. it did not do this before I took it apart.. it's as if it does not have the spring strength it had before.
 
is there a way to increase the spring? to say it differently is there a way to increase its disengagement force.? is there a setting for this?
 
I would like to know a solution for this as well. My rear doesn't like to unlock unless I drive in reverse and is slow to lock up when I flip the switch, the front is on/off with no issues and would like to get the rear working the same.
 
i took my 1995 rear oem e-locker apart to inspect. it all looked realy good and clean so i put it all back together. now the darn thing wont disengage unless i jack up the rear off the ground to take the wt off. what did i mess up? the front e locker works like a champ.. engages and disengages immediately.

My guess; didn't get the gear timing right, biased more towards lock?
 
There are some photos of gear timing, sorry but you gotta search.
Unless someone can post a pic.
 
Clownmidget has a good write up. Search for it. Also, there is a great pdf file, google it. I know that this is off topic, but if you convert the rear accuator to air(I use co2) it works much better. You can get different strengths return spring and adjust force with valve and gauge.
 
Back
Top Bottom