Driver side floorpan for 79 40 doesn't fit?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 18, 2006
Threads
313
Messages
2,096
Location
Alabama
I'm very frustrated right now. I purchased this item from real steel P.O.S. cruisers. Waited 3 weeks, after it arrived the stupid floor pan didn't even fit. My body shop guy says that the part that goes around the tranny hump is fine, but he said that there is not enough metal to fill up the space between the side of the car (where the running boards are) and the tranny hump. Is it supposed to be like that. He said there is about 6 inches of metal that is "missing". I don't if i got a defected one or if it is supposed to be like this for $200!!!! My rig was just about to be done in 2 weeks. This adds on another month, :censor: :censor: !!! I regret doing business with real steel cruisers. Anyone had a similar experience?
 
My guess is the part you are missing is the tail. I'll have to look but there is probably a seam there and Real Steel, CCOT, and Heritage decided not to include that.

http://www.canadacruisers.com/product_df79.htm
http://cgi.ebay.com/ebaymotors/Toyo...cmdZViewItemQQcategoryZ42611QQitemZ4615040889
http://www.heritagesheetmetal.com/40seriesfloorpanels/1984197940front.html
http://coolfj40.stores.yahoo.net/floorpanfron.html

and Johnathan, you might want to get a different source pic on your website. That pic looks a lot like CCOT's pic.
5c_1.webp
FFLRDRVR79-844web.webp
coolfj40_1898_2201749.webp
 
Floor Pan

I just ordered and received a driver side floor pan from Canada Cruisers. I have used them before and been happy with the fit for the most part. Not perfect but they do seem to be the best for the price.

I purchased the floor pan for an upcomming restoration. I will not need it immediately like you do. If I remember right you are in Birmingham. I am in Fayetteville, Ga. I will order another one and give you this one if that will help you out. I believe in an earlier conversation you come to Atlanta often. Anywya just let me know.

Regards...
 
Wadesters said:
. I will order another one and give you this one if that will help you out.

Wadeesters..ur alright in my book....and hell...it ain't even my cruiser! ...although I'll need some floor pans (among other things).

BA, Did you try calling them??? I"ve no experience w/ them through purchase but I've seen one of the guys from Real Steel on here from time to time and they seem to be nice enough types. Sorry bout ur rig and hope you get it back to the street soon enough.

Bx
 
PScottBx said:
Wadeesters..ur alright in my book....and hell...it ain't even my cruiser! ...although I'll need some floor pans (among other things).

BA, Did you try calling them??? I"ve no experience w/ them through purchase but I've seen one of the guys from Real Steel on here from time to time and they seem to be nice enough types. Sorry bout ur rig and hope you get it back to the street soon enough.

Bx

I called them, Tony is very nice. I asked for exchange. No problem, he'll even pay shipping. However, i have now decided to get a full refund and buy it from Wadeesters. I'm afraid that Tony won't give a full refund and pay for the shipping. I will call him tommorow.:bounce:
 
I used an old Cruiser hood to repair my passenger floor. Worked pretty good and was free.

If you need some good, flat sheet metal for free, go to the local dump or transfer station and take off some dryer doors and washer lids.

Good to know that the supplier is making good on the deal.
 
Pics. How the hell are we suposed to say they screwed up or not if we don't have pics.


Did you see a pic of their product before you bought it?

Did it look like what you wanted replaced?

Though pics would be nice so others know about issues with this particular product.

Personally I wouldn't have bitched until I had things settled. Sounds like they were trying to make it right.
 
Screw you guys, I don't know about you guys, but i get pissed off when i pay 200 dollars, wait 3 weeks, and then the part is not usable, throwing my project behind another month.

Called tony, he said he would take a full refund, but i could tell he was not happy about it. He didn't mention paying for the shipping either.
 
The pictures I posted above should explain what the issue was. You wanted the entire front floorpan and the part he, and the other vendors offer don't include the rear tail. I woud pay to get the ribbs rolled into the part because I don't have the tooling but....any good body man can bend up that rear piece. If they can't, you need to find a new guy to do your bodywork.

I offered up the information that helps people on this board, all you did was flame a vendor without getting your facts straight.
 
badass said:
Screw you guys, I don't know about you guys, but i get pissed off when i pay 200 dollars, wait 3 weeks, and then the part is not usable, throwing my project behind another month.

Called tony, he said he would take a full refund, but i could tell he was not happy about it. He didn't mention paying for the shipping either.


What is not usable? Can you at least post some pics.

Is TreerootCO correct?

Oh and :flipoff2: for the "screw you" comment
 
Yea putting a project back another month sucks but it appears to be the way that every US vendor does this. Maybe suggest to them to note that the floorpan should advertize that the pieces you are "missing" are required for a FULL floorpan.

Sorry but even if it is put back another month that is still a little sketcy to jump up before talking to them and making a bad remark like that. I had purchased TRE's from CCOT and wasn't thrilled with the set I got. I called and since I REALLY needed them (as I already had the old ones off and had no vehicle without them) they cut me an awesome deal. I still run 2 TRE's out of the set on my cruiser and would order from them again being as they made the effort to quickly right my problem. Give a vendor a chance and they will fix it being that they know people talk on places like Mud.
 
badass said:
I called them, Tony is very nice. I asked for exchange. No problem, he'll even pay shipping. However, i have now decided to get a full refund and buy it from Wadeesters. I'm afraid that Tony won't give a full refund and pay for the shipping. I will call him tommorow.:bounce:

badass said:
Called tony, he said he would take a full refund, but i could tell he was not happy about it. He didn't mention paying for the shipping either.

Lets be careful before we flame a vendor, it seems as Tony has made good on the deal, even gone the extra mile. I would be unhappy too if I shipped the item and it was coming back (if it is the part that was advertised).For all we know your body man jacked up the project and cut 6" of material out that he shouldn't have.

YOu have stated that "Tony is very nice," and that "he said he would take a full refund." I can't ask much more from a vendor than that.

Just my .02

Rezarf <><
 
REZARF said:
Lets be careful before we flame a vendor, it seems as Tony has made good on the deal, even gone the extra mile. I would be unhappy too if I shipped the item and it was coming back (if it is the part that was advertised).For all we know your body man jacked up the project and cut 6" of material out that he shouldn't have.

YOu have stated that "Tony is very nice," and that "he said he would take a full refund." I can't ask much more from a vendor than that.

Just my .02

Rezarf <><
I'm gonna agree with Rezarf here
 
Back
Top Bottom