Did the 80 ever...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 4, 2006
Threads
2
Messages
102
Location
Central MN & TN
just curious if the 80's mine is a 96 ever had a engine block heater as a option? If so dan can i order one from you are they hard to install?

live in central Mn and the temps get to below zero often, she :princess: gets very stiff in the morning!

thanks a million,
kunal
 
Lower rad hose heaters are usually a better choice.
Work a lot faster. Usually 1500 watts, and not the 150-400 that a block heater is.
Faster to install and easier to change.

Cheers,
N.

hello nick where might I find this? Local auto parts store such as Napa or Autozone?

thanks,
kunal
 
You should be able to grab one at a local auto parts store.
Shouldn't be to much money. $30-40 probably.
Go for a high watt version. Warms up a truck a lot faster.
I usually put mine on a timer to come on an hour to two before I leave (depending on temp).

Just make sure you install it on the lower rad hose, not the upper.

Cheers,
N.
 
To answer the question about whether a block heater was ever an option on the 80s?

IIRC from recent threads on this the answer was no, at least not for North American 80's

EDIT: See below for the truth - never trust my memory :flipoff2:
 
Last edited:
I strongly disagree with the radiator hose in-line heater. They can, and will, burn antifreeze-effectively rendering it useless. The block heater is by far the better option. We see up to -65 and it keeps things warm enough for me. Toyota charged me $130 installed up here. Probably cheaper in MN. Get a trickle charger, oil pan heater, and tranny pan heater- your Cruiser will be rated for Alaska weather.

TK
 
You should be able to grab one at a local auto parts store.
Shouldn't be to much money. $30-40 probably.
Go for a high watt version. Warms up a truck a lot faster.
I usually put mine on a timer to come on an hour to two before I leave (depending on temp).

Just make sure you install it on the lower rad hose, not the upper.

Cheers,
N.

thanks a million for your time and advice will check tommorrow. :)

kunal
 
I strongly disagree with the radiator hose in-line heater. They can, and will, burn antifreeze-effectively rendering it useless.

Never had an issue.
How long did you leave it plugged in for? and at what outside temp?

Cheers,
N.
 
I strongly disagree with the radiator hose in-line heater. They can, and will, burn antifreeze-effectively rendering it useless. The block heater is by far the better option. We see up to -65 and it keeps things warm enough for me. Toyota charged me $130 installed up here. Probably cheaper in MN. Get a trickle charger, oil pan heater, and tranny pan heater- your Cruiser will be rated for Alaska weather.

TK

so your saying they do make block heaters for our 80's! Dan can you tell me the part # and how much its going to be? will call you tommorrow in any case.

thanks a million to all that answered my question,
kunal
 
Sorry, I do not have the part number handy. PM CDan and get the part from him. They are definitely sold by Toyota though. The Block heater itself is under $100.
I have had the inline heaters on a few of my 40s, and had them burn antifreeze at -10 and warmer. They can be a fire hazard as they get older as my first 40 will attest to.:-(

TK
 
IIRC, and I could be wrong, but I thought the OEM one was unobtainium but there are non-OEM avail, I dont think mine is OEM.
 
Both mine have Toyota block heaters in them I installed. One I got back in 93 when I bought the truck, the other a couple years ago through Dan. I think they're no longer in NA distribution, but if you do a search here you'll find there is another Toyota block heater from another model available (Sienna?) that is the exact same model. Search diligently and you'll also find instructions for proper installation.

DougM
 
Both mine have Toyota block heaters in them I installed. One I got back in 93 when I bought the truck, the other a couple years ago through Dan. I think they're no longer in NA distribution, but if you do a search here you'll find there is another Toyota block heater from another model available (Sienna?) that is the exact same model. Search diligently and you'll also find instructions for proper installation.

DougM

I think I do remember reading this as well but, wanted to see if they made any after market ones. will try all options and see which is the most feisable!

thanks a million,
kunal
 
The Previa used the same one as the 1FZ.



Discontinued.



Toyota Canada may still offer them.
 
The Previa used the same one as the 1FZ.



Discontinued.



Toyota Canada may still offer them.

thanks Dan will call you tommo just want a few other things.

kunal
 
mine is oem ... Doug_w and I installed 2 this past weekend... I notice the truck doesn't idle as high in the morning, and warms up way faster.. I would definitely recommend the block heater!!

Cost was $35 Can. and were purchased from a local lexus dealership (they ere even in stock)!

Good luck!
 
C0140-00144-S2 is the part number (from Toyota Canada) for the one I installed in my truck. List price was $34 Canadian.

IMG_3265.JPG


IMG_3238.JPG
 
I watched the show "Trick My Truck" on CMT I watched them pull the heat pads from the back side of a heated mirror.....and ever since then I've wondered if you can wire them with a momentary toggle switch and either place the pads into or onto any pans, this would heat the oil quicker and although it would not be a block heater it would heat the engine up faster and you would be staring it with warm fluids.....




wonder if it would work.....?


seems like it would be cheap too.
 
Last edited:
thanks everyone for all the helpfull replies will check the toyota of canada with the part # provided.

thanks again,
kunal
 
Tank heaters work just fine. Just dont get some off brand POS..


When I was in emergency power generation biz everything had tank heaters.
 
Back
Top Bottom