Desmog components (9 Viewers)

[FJ40Jim]

Hey Al, dizzy is no problem, 2 weeks or less. Carbs are way backed up, a month plus currently...

 

[lowtideride]

Cool! Cleaned and all ready to ship out. It should be north bound by Wednesday. Thanks again

 

[lowtideride]

Sent the money via Paypal... Package north bound!

 

[feverDream]

Jim,
wondering if you are stocked up on the full desmog kit, ready to pull the trigger.

 

[FJ40Jim]

Yep, all desmog parts in stock, ready to ship.

 

[sterling]

PayPal sent for idler pulley

1979 May Build FJ40 with factory ps

Thanks,

Ryan S.

GA

 

[FJ40Jim]

Ryan, the $ arrived, thanks for sending that. The 79-80 trucks have a smaller AP, compared to 81-87. I don't have that one in stock. It has to be fabricated by cutting down the mass produced 81- plate & pivot sleeve, then welding together.

Not a big deal, but will be a few days before it can get out the door during this snowpocalypse.

 

[Healey]

Tide, dissy clean & recurve is $129. The pinging after EGR removal is exactly the problem that recurving is addressing.[/QUOTE]

Jim - I need a recurve on my '87 distributor for this same pinging reason. Got your shipping address from above. Can you forward Paypal info.
tnx
Bill

 

[FJ40Jim]

Paypal can be sent to my 'mud name at gmail dawt c0m.

FWIW, there is a 30% chance that any FJ60 dissy has a dead vac advancer, rendering it essentially worthless. If yours is bad, I'll just send it back as is, no charge. Wait until I've inspected it before sending the $$.

 

[lowtideride]

Yikes. Any word on the one I sent you?

 

[sterling]

No problem Jim thanks.

 

[FJ40Jim]

Al, yours tested good, no vac leakage from either diaphragm.

 

[lowtideride]

Al, yours tested good, no vac leakage from either diaphragm.

Wonderful news! Thanks again!

 

[NookShneer]

Jim - I need all the plastic caps to cap unused pipes. Do you do a kit that just includes that? Thanks and how much to 98270.

 

[FJ40Jim]

Nook, if you mean little vacuum caps to cap off the 3.5mm vacuum hose fittings, they can be sourced from FLAPS or hardware store. I do sell the large vinyl caps for the air cleaner nipples where AIR pump hoses were connected.
2 caps= $2,
plus $5 shipping & hassling= $7 grand total.

 

[feverDream]

Got the last of the components yesterday, Thanks Jim!

On a personal hijack note, where the heck did I see the emissions FSM pdf?? I thought it was in the 40 forums but yo no se.

Anyone know the link or can point a finger? I DLed everything but that one.

 

[feverDream]

never mind on the FSM. found it!

 

[NookShneer]

Nook, if you mean little vacuum caps to cap off the 3.5mm vacuum hose fittings, they can be sourced from FLAPS or hardware store. I do sell the large vinyl caps for the air cleaner nipples where AIR pump hoses were connected.
2 caps= $2,
plus $5 shipping & hassling= $7 grand total.

Jim,
Sent to your paypal.

 

[sterling]

Idler pulley received. Quality is great and it mounted easily.

Thanks Jim!

 

[GA Architect]

Paypal sent for Desmog Components, Pt. 2....Also sent email about some dizzy work.

Thanks!