Dash Box

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm with Dustin -

An M-60 mounted to the roll bar is the way to go! Forget the 30-30 lever action in a lock box. An M-60 will really cut down on those soccer moms cutting you off on the freeway! :D
 
rsrai said:
i remember about 7 years ago this guy in a red fj40 flipped a u turn after he passed my brother and i in in our fj40 on the Alameda going to SCU. He caught up, waved us into a parking lot, and almost sold us his dash toolbox that he made himself. Ours was in good condition at the time, so we didnt take him up in it. I dont remember his name though, wonder if thats the same mr dashman. Does he or did he have a red fj40? im pretty sure it was red. we were around santa clara university.

That's him
 
I got a call from Mark Vickers today and he is going to order some more dash boxes as he is currently out. Price has gone up, but how much may depend on how many he orders from the sheetmetal guy. So.....if anyone has an interest, please call Mark or PM/email me and I will relay a "count" to him.


Tanks,

Ed:bounce: :bounce2:
 
rsrai said:
i remember about 7 years ago this guy in a red fj40 flipped a u turn after he passed my brother and i in in our fj40 on the Alameda going to SCU. He caught up, waved us into a parking lot, and almost sold us his dash toolbox that he made himself. Ours was in good condition at the time, so we didnt take him up in it. I dont remember his name though, wonder if thats the same mr dashman. Does he or did he have a red fj40? im pretty sure it was red. we were around santa clara university.


It was red. I ran into him on the Fordyce trail before I moved up here in 97. Mark had a red 40, and it was the first time I had seen both the dshbox (which I own now) and a spare carrier using a working spindle, birf and lockout hub.

I have had mine for at least 7 years now and it is awesome!

Jim
 
Degnol said:
I got a call from Mark Vickers today and he is going to order some more dash boxes as he is currently out. Price has gone up, but how much may depend on how many he orders from the sheetmetal guy. So.....if anyone has an interest, please call Mark or PM/email me and I will relay a "count" to him.


Tanks,

Ed:bounce: :bounce2:


Whats a ballpark figure on these? I'm interested but not till this summer probably.
 
Phish, I don't know as Mark will not know until he orders. However, BTB still has them in stock at $285, so it would have to be close to that, otherwise it would not make sense. I have never dealt with BTB, but I have not heard anything bad about them, either.
If Mark still makes the ones that BTB sells, seems like he could make a profit and still come in under BTB.
Will see.

Ed
 
I thought I was out of touch with what Cruiser vendors are out there. I guess I thought everybody knew about BTB's rep. I'll not comment on their rep for decorum's sake.

If you ever *need* to know, ask Georg (Orangefj45). :D
 
Are you still looking for the original dashman? That would be me, Mark Vickers. I live in San Jose and you can reach me at hdspeedknob@yahoo.com or by phone at 408-947-1530. I am still selling dashboxes, though I am out of stock until July 28, 2006. I went with a new vendor for my dashboxes so that I could keep my current prices of 249.00 plus shipping and tax. My first order from the new vendor was due a few weeks ago but I found an error on the lid and sent the whole order back. I am currently taking orders for the new boxes and the shipping date is approximately Aug 1, 2006. Any questions...call me anytime! My prices for the dashboxes have stayed the same at 249.00. As always, if you live in the bay area and come by my house I will install the dashbox over a few beers and some good stories about wheeling.
MARK
 
Last edited:
Are you still looking for the original dashman? That would be me, Mark Vickers. I live in San Jose and you can reach me at hdspeedknob@yahoo.com or by phone at 408-947-1530. I am still selling dashboxes, though I am out of stock until July 28, 2006. I went with a new vendor for my dashboxes so that I could keep my current prices of 249.00 plus shipping and tax. My first order from the new vendor was due a few weeks ago but I found an error on the lid and sent the whole order back. I am currently taking orders for the new boxes and the shipping date is approximately Aug 1, 2006. Any questions...call me anytime!
 
What is the exact width of the dash box? I'm wondering if it will fit between my cage uprights. Also, do the large windshield knobs go through the box? I don't see them in the photos. Is the box weatherproof?
 
I can see how high it sticks up by using the reference of the defrost duct. Can someone measure how far it sticks out towards the front seats?

I have 4" between the crossbar on my cage and the dash. That will make it real close to fitting or not fitting. The pic below is looking across the dash between the dasha dn the crossbar while standing outside of the vehicle.

Pics if yours would help.

Thanks
DSCF6813.webp
 
Last edited:
Dan, the lid is about 4 3/8" wide, so if all you have is 4".......wait, that doesn't sound right:o
I have a Dashman box not yet installed if you want more measurements. It may be narrow enough to clear the "A" pillar of your cage.

And Brian, it fits well between the dash knobs, but I can go measure it if you want.
 
So you have a metal cage cage and it fits?

Well, as I said, it isn't installed yet, but the box is 44" wide and I have 46 1/2" between the A-pillars, so it should fit just fine. Yes, MetalTech cage.

Dan, BTW, the locking/opening mechanism is on the top of the box which would give you access even if it is a tight fit with your cross tube.
 
Back
Top Bottom