I just installed a Curt 13089. Seems pretty nice. I took some pictures of the clearance. It sticks out about 5" from the bumper. It has about 2.25" clearance from the spare tire. Tire is a 265/75 R16. I did have some issues with fitment. The spacers they give you are a little too long and I had to cut them down to clear some of the welds on the frame. Also, the nuts in my frame were rusty. I ran a tap through them. Wasn't sure they'd hold without stripping but surprisingly they did. The super fine thread takes awhile to torque up though and feels like it's gonna strip the whole time.
Also, it seems this is really the only new option anymore. Drawtite, Reese, Curt, and Hidden Hitch are all owned by the same company. They all have different model numbers for the 80 but the pictures look identical.
Also, it seems this is really the only new option anymore. Drawtite, Reese, Curt, and Hidden Hitch are all owned by the same company. They all have different model numbers for the 80 but the pictures look identical.
