SoCal post before going to general for sale area.
First Item is not shippable due to size. $100 OBO, local pick up or delivery within reason
Drawer I built for the PS of the rear cargo area, but should also work on the DS. 3/4" oak plywood construction doweled and glued. Drawer slides on HDPE in routered channels in the bottom of the drawer giving much more room in the drawer.
Outside dimensions HxWxD 7"x20 1/2"x41 1/2", interior drawer dimensions 4"x16 3/4"x39 1/2". Bolts down into the existing 4 bolt holes from the 3rd row seat. (bolts not included). It fits nicely on one side of the rear cargo area from the back of the 2nd row seats to the hatch. Finished with several coats of marine varnish.
I had the fridge slide bolted to the top of this.
Taking a little weight out of the rear of the cruiser, so went back to a single sheet of plywood to bolt the fridge slide and moved the rest to my trailer!
First Item is not shippable due to size. $100 OBO, local pick up or delivery within reason
Drawer I built for the PS of the rear cargo area, but should also work on the DS. 3/4" oak plywood construction doweled and glued. Drawer slides on HDPE in routered channels in the bottom of the drawer giving much more room in the drawer.
Outside dimensions HxWxD 7"x20 1/2"x41 1/2", interior drawer dimensions 4"x16 3/4"x39 1/2". Bolts down into the existing 4 bolt holes from the 3rd row seat. (bolts not included). It fits nicely on one side of the rear cargo area from the back of the 2nd row seats to the hatch. Finished with several coats of marine varnish.
I had the fridge slide bolted to the top of this.
Taking a little weight out of the rear of the cruiser, so went back to a single sheet of plywood to bolt the fridge slide and moved the rest to my trailer!
Last edited:
