Club Tune-Up HAMOM

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hey John, You get those belts i shipped you yet?

and for anyone interested i have some 3FE tune up parts left....

I will try and make it also.. need to switch my diffs to synthetic...


Dave
 
Dave,
Got it this morning! Thanks, i'll get a check to you for the shipping in the mail tom.
 
Time is up in the air, I could be ready as early as 8 ish, so give me a time that is good for you all.
 
Last edited:
I have tools enough to get me into some good trouble, but specialized tools you may want to bring. I got a couple jacks 2 pairs of stands, a couple drain pans maybe 3.

The pool is up and running, tile around the edges arnt pretty. a little over 9' deep at the deepest with a diving board, if anyone wants to go for a swim. We are currently building a playset for my daughter, so if you have kids there are things for them to do. BYOB too :cheers:
 
delta21 said:
Would an exhaust minifold gasket be too ambitious?
Click to expand...

That's Lenny's call as it is 'his' HAMOM - but - what type of replacement manifold gasket do you have - OEM or Remflex? Why was your old manifold leaking? Where the intake and exhaust apart? If so you might need to get them planed.

If your intake and exhaust don't need to be planed and you have a good replacement gasket you should be able to do this in 4 hours when you add in the beer drinking and shenanigans. If you start breaking bolts it could be much longer - and louder!
 
My HAMOM was attended by mostly Jeep drivers and a 4Runner person... So I have a 1FZ that was installed by Jeepers...WOW
 
eventhough said:
That's Lenny's call as it is 'his' HAMOM - but - what type of replacement manifold gasket do you have - OEM or Remflex? Why was your old manifold leaking? Where the intake and exhaust apart? If so you might need to get them planed.

If your intake and exhaust don't need to be planed and you have a good replacement gasket you should be able to do this in 4 hours when you add in the beer drinking and shenanigans. If you start breaking bolts it could be much longer - and louder!
Click to expand...

I dont mind, at all. If you think it can get done :wrench:
 
Alright time to assign a err time...

Garage opens 9 am.

Feel free to show up around then or whenever is right for you, see you all sat!
 
Boot,

See you at 9, let me know if you want me to bring anything, floor jack, extra beer etc....
 
eventhough said:
I've got a light for timing and feeler gauges for valves but it would probably be better if someone else did the adjusting for you than me!
Click to expand...

Thanks, I'm sure someone there will be able to do so. See y'all Saturday.

BTW, I have a new 3rd and Aussie locker to play with if time permits!!!
 
jleeFJ62 said:
Boot,

See you at 9, let me know if you want me to bring anything, floor jack, extra beer etc....
Click to expand...


It will be BYOB :beer:

I was thinking on grabbing a lot of Hot dogs and grill em for lunch, quick and easy. Unless you all have a different plan.

Also my house sets up on a little hill, the drive is kind of hidden by bushes. I have put a White post at the end of the drive with 303 on it. The drive kind of splits into a U thing and heads back out to the street, Pull around back when you get here.

If for some reason you get here and no one is in the back come in the garage and ring the door bell. I do not have one on the outside yet.

Or just follow the voices we may be around the corner, unless the voices are in your head you might not want to listen to those.
 
Last edited:
I'm coming in the morning. I need to change out my plug wires on my 80 series. Figured I could lend a hand with others for a couple hrs also. Not going to be able to stay past lunch My 20th high school reunion is that night as well the Dr thinks we might be having a baby next week so I have lots to do.

See y'all in the morning.
 
See ya'll in the AM. I need to install a rebuilt alt and new belts, but after than willing to lend a helping hand the rest of the day.
 
Be sure to get lots of pics...and have a good time!

Just remember:

righty = tighty; lefty = loosey
 
boombapslappy said:
Be sure to get lots of pics...and have a good time!

Just remember:

righty = tighty; lefty = loosey
Click to expand...

Not for beer. Hmmm maybe that's why I get all confused.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom