Clean up thread (for old posts) (1 Viewer)

[brianinaustin]

Sig Trailside 22 pistol and 30-06 ammo

Posted a 22 pistol and some 30-06 ammo for sale....

https://forum.ih8mud.com/showthread.php?t=179769

https://forum.ih8mud.com/showthread.php?t=179773

 

[gswest]

1988 FJ62 automatic transmission 4 sale

This transmission just came out of my truck and is in Irving, Texas. It comes with the flywheel and torque converter. It shifts great and was rebuilt ($1600) about 25,000 miles ago (reciepts available for buyer). Asking $400. Reason for sale is because I'm switching to a Vortec.

E-mail me at gswest1@comcast.net or call at 772-631-5119.

 

[casey]

Slee Caster Plate Kit

"This is a bolt on kit (some welding recommended) that will correct the caster for 4" of lift on a '91-'97 Land Cruiser"

http://www.sleeoffroad.com/products/suspension_pieces_spacers.htm

new, never used. prefer local but can ship if needed. $120

 

[AustinBear]

Anyone have or know of a transfer case for an F60, in the area? Just had Ike's look at my Fairey OD and it needs to come out, so I need a whole new transfer case. I have a late '85 F60.

Ike's is looking at pricing on a rebuilt H55 w/transfer case. However, unless the deal is great, I'll stick with the 4spd for now. I only do about 100 miles a month on the F60 (saving it for my old age...).

If I can't get anything locally, I'll probably go with a unit from cruserparts.net, unless you have any other ideas. I'll have Ike's rebuild the case if I go this way as the labor is only about $150 for the rebuild vs. the replace...

Thanks,

ab

 

[davegonz]

Austin Bear,

$150 for labor, do they let you bring in the rebuild kit for the transfer case or do they make you buy it there? That's pretty cheap for a rebuild.

 

[fj40charles]

Anyone have or know of a transfer case for an F60, in the area? Just had Ike's look at my Fairey OD and it needs to come out, so I need a whole new transfer case. I have a late '85 F60.

Ike's is looking at pricing on a rebuilt H55 w/transfer case. However, unless the deal is great, I'll stick with the 4spd for now. I only do about 100 miles a month on the F60 (saving it for my old age...).

If I can't get anything locally, I'll probably go with a unit from cruserparts.net, unless you have any other ideas. I'll have Ike's rebuild the case if I go this way as the labor is only about $150 for the rebuild vs. the replace...

Thanks,

ab

Ab,

I have one, but I'm not sure it that will work since it is from a 1981 to 1985 FJ60. Compete with 4 speed and still connected together.

Charles

 

[AustinBear]

Austin Bear,

$150 for labor, do they let you bring in the rebuild kit for the transfer case or do they make you buy it there? That's pretty cheap for a rebuild.

Sorry, I meant $150 more for the rebuild vs just the swap...It was nearly $500 in labor just to swap them out and $600 something for the rebuild. They would let me bring my own stuff, as they would just source it from the same place. They had some parts quotes for me when we talked yesterday, but I was able to recite the prices and sources to him before he could finish, as you probably could as well - his sources were Man-a-Fre and Cruiser Parts.

Intestetingly, the labor for swapping the entire tranny and TC is the same as for just swaping the TC - about $500, which is why I went ahead with the new 5spd. I figured I'd do it some day and why pay the labor twice.

 

[AustinBear]

Ab,

I have one, but I'm not sure it that will work since it is from a 1981 to 1985 FJ60. Compete with 4 speed and still connected together.

Charles

Thanks Charles, but, yes, mine is the later 85 version with the newer/different version of the TC.

BTW, thanks to all for your help/input. I'll look forward to meeting you sometime, probably around Austin. Most interested to see your rigs as mine is a pretty basic/stock unit - just tires, wheels, greasable shackles and that's about it (intil I get the 5sp in!) - though it is a fairly low mileage LC with 118k 'only' on it.

 

[Drunk Monkey]

Mid to late 60"s Fj40

I have mid to late "60 fj40 parts truck. it has the hood, cowl, front grill(no lights or buckets, windshield frame, Frame, front and rear axles (no front springs), tire carrier, gas tank, and misc. other little things. There is no motor ,transmission, transfer case,or fenders. NO Title

First $600

Call 512-773-6791

 

[madoc1]

jason, or anyone else--today iwas cleaning one of my taillite receptacles. 1975 fj40. you know, the metal thingy that containts 3 bulbs. anyway i caught a wire on the brush as as , bingo! trash. does any one have one? thx jim

 

[madoc1]

found some for anyone who even thought about thx jim

p.s. spector has a 10% off sale going on now.

 

[warpdriv]

87 FJ 60 Parting Out

Just picked up a complete 87 FJ60 last night. All the drive line is sold (engine, tranny, tcase, axles)

No Rust
Silver interior

If you want something, please PM me about the part and a price you want to pay. This will save a couple of emails.

Thank you,
Jeff

 

[sraller]

i have a brand new never been assembled otc hydraulic shop press part #1825 17 1/2 ton need to get rid of it as i am selling my house and my next house probably will not have the garage space i currently have . this unit sells for $2000 - $2300 im looking for a ball park of $1500 . i also have fj40 radiator -new- with slight shipping damage - make offer - and a gm p/s gear box - make offer - 1974 fj40 rear seats - sideways mount that fold up to the roll cage - make offer

shawn

 

[sraller]

i also just came by a 1977 fj40 all stock no title $800 bucks . i have limited info on it but i can set you up with the owner if anybody is interested

 

[arcteryx]

Austin LSLC Members

If you wish to join/renew your membership, you can Paypal $30 to the chapter at austinlslc@gmail.com. You can see more info about the chapter at www.lslc.org/austin

Here are the 2008 Austin LSLC Members:

Hunter A
Jason & Rhea K - drunk monkey
Jeff & Kerry B. - warpdriv
Brian & Rachael V.
Jason & Chinell D.- arcteryx
Michael R. - mkaustin
Mark P.
Joel B. - kling-on
Darius W. - trd55
Michael R A. -
Mauricio L. - spallet
Sean R. - sraller
Kelly C. -
Brian B. -
Matt B. - krookedpandas
Bret N. - BrettinSanAntonio
Randy S. - iaintscared1969
Victor G. -
Steve L. -
Toby & Mindy H.
Mark & Michelle MW - mmw68
Dave G - davegonz
James M - madoc1
Sonya L. -
Michael Ba. -
WL and Mary S. - Lake Rat
Heath W. - emblu.denslob
Brent C. -
Michael Br. - bridges
Dave K. - tewerk
Robert C. - Rockhor

Please contact me with any questions.

Cheers,
Jason

 

[Lake Rat]

New Member

arcteryx-

Hey, I'm finally on, my handle is Lake Rat. I have sent my membership in to TLCA, but have not heard anything back yet, this was a couple of week ago, so any day now I should have a member number for you.

See ya' next time - W.L.

 

[emblu.denslob]

just joined MUD h8ers as well. I joined TLCA but have also not received word from them about a mbr#. handle is on the left.

whale lover - hw

 

[Lake Rat]

Membership

Jason,

I just recieved my TLCA membership in the mail last night. My member # is 18804. Thoght I'd pass that on to you.

W.L.

 

[arcteryx]

Jason,

I just recieved my TLCA membership in the mail last night. My member # is 18804. Thoght I'd pass that on to you.

W.L.

Thanks W.L.

 

[alex e]

60 series driver's rear quarter and liftgate needed

Need one for my crunched 88 62.
I can pick up most anywhere.....


Gary in AR I tried to PM you.


Alex