Buying, Selling & Trading

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Found a CB40M for the 40, but need the mic 🎙. If anyone has one they’re willing to part with or knows of a source, let me know please.
Thanks!

54771E71-47B0-4BCF-813F-C0E069D0B39F.webp


A1F79E17-915B-4FE3-B9F6-7DFAFC32E99C.webp


31D55389-F208-4DEA-8206-542261AF7A21.webp


A52F3DCD-B317-4C28-9BFD-E880F64C726A.webp
 
REZARF said:
I have an extra mic you can have, it is a cobra not sure if it would fit. Cool find though.

Edit: didn't scroll down... lots has happened!
Click to expand...
Sounds great! I've got the feelers out for a matching mic as good as I can. If your Cobra is a 5 pin and fits, Russ at Cape Fear Electronics will configure it to the cb40m for me. I'll use that until a cb40m mic comes along :). If your around this Sat or Sunday, I'll swing by at your convenience w the radio to try the mic.
Thank a bunch!!!
Mitch
 
Anyone need a set of brand new Dobinsons extended sway bar brackets for an 80 series?
Also have a relatively new set of stock height OME front springs.
 
I'm looking for 1 60/62 series stock chrome rim.
doesn't need to be perfect as it will be for the spare tire
 
Hey everyone! I'm thinking about selling my Goodyear Duratracs in favor of a more mild AT tire. They're 285/75/16 and at about half tread (happy to grab measurements/photos for anyone interested), with no plugs or patches. They're currently mounted on some sweet Stealth Custom Series F5s in jet black with -25mm offset and 3.5 backspacing. I like the wheels a lot but I'm not opposed to selling them all together. The first photo shows the only rock rash on any of the wheels.
With all this being said, I'm also on the hunt for a set of Falken Wildpeaks or Toyo Open Country AT3s in 285/75/16, 285/70/17 or a similar size. Please let me know if you have any leads!

IMG_7690.JPG


IMG_6818.JPG
IMG_8904.webp
IMG_8905.webp
 
Last edited:
Hey everybody I just got in the mail a fresh set of 80 series front and rear door OEM belt moldings. However, I ordered the wrong part numbers and they sent chrome instead of black. The return shipping to partsouq in Dubai is more than double what I paid. So if anyone with an 80 wants them here in Bozeman is your win my loss. $80 bucks..

Cheers

Mike

IMG-7790.webp
 
I am looking for a cheap 2nd Gen 4Runner base to build a family 4 seater rock crawler. Looking to spend about $500-$1000. Does not need to have any drive train as I will be replacing most everything as far as engine, trans and axles. With gas prices the way they are looking to stay with in 100 miles of Columbus, MT.

If you have a built solid axle 2nd Gen 4Runner I can go up to $6000. If you have any one ton or FJ60 or 80-series axles, would also be interested in those. I am just now gathering parts to build this rock crawler so if you have any parts that might interest me please let me know. Springs, Shocks, Tires, Seats, 5VZ, A340, T-Cases for NWF Eco Box, DOM Steel and so on.
 
Have a nearly new 22r clutch free to good home. Hate to throw it away.
 
Anyone have an OEM distributor for a 3FE FJ80 that they want to sell? Figured I’d check here before settling for a crappy knockoff online.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom