Broke my Longfield!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2006
Threads
30
Messages
173
Location
Nebraska
I was in Moab last week (great time!), and broke a Longfield. At least the PO told me they were longfeilds, and when I installed my cut and turned housing, I had to clearance the housing to get them stuffed in there, so I know they weren't stock. I have mini truck disks, so they are 30 splined. There is a Powertrain shop in Moab, which had a Birfield with 30 splines so I threw it in in the parking lot of the super 8 and was wheelin again the next day. Pretty sure the replacement Birf was out of a mini truck since it had 30 splines and the inner axle was too short. My question is, how do I tell the difference between Longfields and Birfields? The cup on the one I have in there now is slightly smaller than the one I broke, but I don't see any major differences. I have seen Longfields that have "Longfield" stamped on the flat spots, neither my old ones or my new ones have anything stamped on the flat spots, but my old ones do have a part number stamped on the end of the outer axle..(dont have the number with me).........:confused:
Thanks
Tom
 
the new 4340 longfields will have "longfield" stamped on the flats of the bell

earlier welded-ring longs will, obviously, have the welded ring...lol

"unsure" how to tell on the mid-series treated but not welded-type longs...
 
Hmmm........I know they don't have a welded ring around them, and they don't have longfield stamped in them, but I also can't guarantee they are even longfields, other than the PO said they were and that they don't fit into the housing without a little grinding. Does Longfield garantee their parts? any chance I could send the broken one to them and get a replacement? (probably not but worth asking). I'm kinda second guessing the front locker. I drove around all day in 2 wheel low after breaking the axle, and got around pretty damn good! I probalby should have just gone with 1 locker and not 2, but what the hell! Go big or go home right!
 
Just found the Marfields on the Marlin Crawler site. They have a Marfiled UM06 Chrome Moly for $200+ and a Marfield UM05 non Chrome moly for $80! How can they be that much cheaper than LongFields? anyone use the Marfields?

http://www.marlincrawler.com/htm/axles.htm
 
thsorens said:
Just found the Marfields on the Marlin Crawler site. They have a Marfiled UM06 Chrome Moly for $200+ and a Marfield UM05 non Chrome moly for $80! How can they be that much cheaper than LongFields? anyone use the Marfields?

http://www.marlincrawler.com/htm/axles.htm


They are about the same price.
Bobby Long sells a chromo birfield for $195.
 
My bad. I was looking at the complete Longfield kit which includes inners and is for both sides. Yes, they are all close in price. So chrome Moly is the Shizz??? There was a guy in the tire shop the other day with a broken Longfield Chrome Moly and he claimed he wasn't really beatin it that bad. He broke it in a 4runner.
 
I haven't busted mine yet....sure tried, but so far so good....

did break a chromo inner axle (not a Longfield one tho), but the Long held dandy - I now run the full 30-spline front setup...
 
phishtaco said:
Does your birf say EMPI on it?

Just realized it was still in the back of my pickup in the parking lot. Anyways, it says, "UM4 431" on the outer end of the axle. Does that make it an old Marfield?
 
You don't have 30 splines. The 30 spline you're counting is the output, not the input. The 30 spline Longfields are the input. Yours are 27 spline.

The old school longfields, which your busted birf might be, are not particularly uncommon to snap. Better than stock birfs, but nowhere near as good as the chromoly stuff.
 
Advent said:
You don't have 30 splines. The 30 spline you're counting is the output, not the input. The 30 spline Longfields are the input. Yours are 27 spline.

They are 30 splined in the diff, and 30 splined at the hub, but into the birf they are 27 yes. I see that the new chrome moly stuff is all 30, so I guess I would HAVE to buy inners and outers to do Chrome Moly right? No one makes Chrome Moly's in 27's?
 
phishtaco said:
Longfeild makes 27 spline or 30 spline chromos. 27s you use your shafts OR chromo shafts...30s you use his shafts

Right on! And they will all be 30 out at the wheel end? Looks like Marfield does the same thing for $205 each. I think I'll just order 1 for now, to replace the stock one I threw in at Moab, then keep the stock one for a spare and buy another chrome moly if I ever break the other side. Thanks! Heres the quote from Marlin Crawlers site on the Marfields.


Marfield UM-06 Chromoly Birfield Joints Larger tires and bigger rocks require the latest axle technology. These heavy duty replacement Birfield joints are made entirely from 4340 Chromoly steel. Full ball races allow joint unsurpassed turning angles. Can be used with stock our heavy duty Chromoly inner axles listed below.
Two year warranty. If you break one, send it back and we will replace it for free. If you break a second one during the two year period we will replace it for 1/2 price
 
OK, Longfields it is then. The 27 thing was throwing me off, but I understand now. I will get one on order ASAP! Thanks guys!
 
Marlin says his are 100% chromoly. Chromo Longfields have a 300M center spider that adds better than chromoly strength and wear characteristics for that part.
 
Back
Top Bottom