Anyone have some rear body mounts for a 76 FJ40 they want to sell. I was looking at the back of mine the other day and noticed there are no mounts at all. I'm hoping to not have to buy a whole set just for those, but I will if need be.
Body Mounts
- Thread starter ccasteel
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
i dan't have any to sell or give so I am not really answering your question, but... if you are talking about the rubber betweent the steel frame mount and the body I have always made them out of thick rubber. exhaust hanger or old conveyor belting. Holds up well and much cheaper.
hth
gary
hth
gary
- Joined
- Jan 31, 2006
- Threads
- 44
- Messages
- 909
- Location
- Greenwood, MO
- Website
- www.tornadoalleycruisers.org
What Gary said, I've got fiber reinforced rubber for my body mounts. Call Hannah Rubber and see if they've got any scrap, can probably get it for next to nothing.
Watch the road for truck rock / mud flaps.
Binder belt is what i run on my 4wheeler as mudflaps..
BUT I second Colin's Hanna rubber idea. Right off I-70 and close to the bars at power and light.
Man.. Something about that whole line of text just doesn't sound right does it?
BUT I second Colin's Hanna rubber idea. Right off I-70 and close to the bars at power and light.
Man.. Something about that whole line of text just doesn't sound right does it?
I have also heard of using hocky pucks. other wise go to hanna, one of the counter guys is a toyota man chad i think, he allways takes good care of me.
- Thread starter
- #7
More details please
Great ideas, so help me out with a few more details. With the stock mounts I can figure out how to mount them. But, if I'm going to create my own, I need to know how thick they should be and how to attach them. BTW, are there 2 or 4 in the back. I see where 2 would go, but on the SOR sight it seems to indicate 4 are used.
Great ideas, so help me out with a few more details. With the stock mounts I can figure out how to mount them. But, if I'm going to create my own, I need to know how thick they should be and how to attach them. BTW, are there 2 or 4 in the back. I see where 2 would go, but on the SOR sight it seems to indicate 4 are used.
4 mounts in back. The question is what do the other mounts look like as far as deminsion. The back mounts are the same size as all the other mounts, with the exception of the running board mounts and the one that is a friction rub point by the hump in the frame rear wheelwell area.
I have a loose set that I can put a caliper on, but I don't think that will help you.
K
I have a loose set that I can put a caliper on, but I don't think that will help you.
K
2 on the rear crossmember and 2 more about 2 ft foward on the 79 they are different, back ones are round and the other ones are square
79 is different! like you Rob..