bezel mounting grommets ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 15, 2005
Threads
59
Messages
661
Location
High Desert, SoCal
Hi got a couple of really dumb questions. When I removed the bezel from the 73 -40, (it's been a while) I don't remember any grommets or spacers behind it. Could some one post me a pic of what the little devils look like or other options they have used as a replacements? I was thinin of using some small pieces of rubber gas line. The other question is does the rear stock backup light have a lens gasket?
Thanks Brad
 
Buy the rubber pieces at the dealer or make your own out of rubber gas line. The OE ones will stay on the ends of the bolts and not fall off like a 1/4"-3/8" long piece of gas line will. I believe the only reason they are there is to keep the bezel from touching the bib. Could vibrate/scratch but you may not care.

see item 25 from S$R. http://www.sor.com/sor/cat112.tam?xax=21574&page.ctx=cat112.tam

"Part number 112-25 Grill Grommet-Fits 1958-12/78 40 & 45 Series-Sold each, 4 required $3.40 each."

I wouldn't buy it from these theives, for reference only. If S$R wants $3.40 each, your local friendly Toy parts man prolly only wants $2.00 each.
 
bezel mounting grommets? I don't need no bezel mounting grommets.

seriously, I do not run them... but I also do not have a restored rig. IF I did, I would just make them as they are a simple unseen part.
 
I used the butt ends of old tire valve stems - worked great and the price was within my budget!
 
Thanks, I thought I would use some gas line or some faucet washers. Does the back up light lens have a gasket?
Thanks Again
Brad
 
Have another question. What options have you used to reattach the lower dash pads? The clips fell apart when I removed them. Are there some kind of plastic nuts that can be used in place of the clips?
Thanks Brad
 
Is this the light you are talking about? It has a gasket (part # 3), but it's not available through SOR. Not like I would buy from them anyway. I would try to make one for it out of rubber with an Exacto knive.


1968-9/73 40 Series & 1968-9/72 55 Series
154a-01.gif
 
see.........the square bezels have yet another improvment......no gromets ;)
 
Yeah I was afraid there was supposed to be a gasket. Guess I am going to have to improvise.
Thanks Brad
 
Back
Top Bottom