"Best Sliders"

Who's sliders to buy?


  • Total voters
    117

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

so is anyone else besides me making these for the "red headed step child" 91-92s with the cats on the drivers side?

just wondering :D

all good info here and the metat tech cat protection is "sick"!!!
 
Yeah, I was primarily asking about the middle section of the exhaust between the cats and the muffler, where it dips under the frame rail. But I've crunched the tip of the tail pipe too, so it was good to hear about Doc's solution for that.

To me, that crossover in the exhaust is kind of an Achilles' heel for the 80, in terms of breakover. It hangs low and unprotected while also being just about smack in the middle of the wheelbase. Mine had a nice flat bottom on it by the time I sold the truck. Not the end of the world though...

Thanks for the suggestions!
 
Even though I live in Colorado, and so have both Slee and SROR within an hour of me, I decided to go with the MT sliders. I mostly love the look of them, and they're built to be bomb proof. Aside from being a bad mutha trucka, I'm also known as Captain Overkill to many!:D
 
Just put my new Hanna Sliders on today without any problems. I am definitely impressed with the quality. These things feel like they offer some incredible protection.


Thank you Hanna Quality Motorsports :beer:
 
I am going to take the fifth from the start and say IMHO! I find that a slider does two things. It protects while reducing ground clearance. You want strong protection with minimal clearance issues. I will choose the one that is strong but is as slim as possible. It should hug the rocker tightly. It should have an outrigger that is high on the rocker, but wide enough to push most obstacles away from the rear wheel. It needs to be solidly mounted, not just a step. If it is useful as a step, it usually hangs out too far and too low to provide clearance. If you need a step, get a step stool! They are sold at a low price at Walmart. I have one in my truck.
There are two kinds of metal applied to the area under the doors. One is a real "rocker bumper" and the other is a running board. The running board has no place on the trail. It will be torn off. A slider is for sliding against rocks or trees. It is not a step.
I have looked at all of the sliders on the market. I prefer to build my own.
 
Last edited:
I am going to take the fifth from the start and say IMHO! I find that a slider does two things. It protects while reducing ground clearance. You want strong protection with minimal clearance issues. I will choose the one that is strong but is as slim as possible. It should hug the rocker tightly. It should have an outrigger that is high on the rocker, but wide enough to push most obstacles away from the rear wheel. It needs to be solidly mounted, not just a step. If it is useful as a step, it usually hangs out too far and too low to provide clearance. If you need a step, get a step stool! They are sold at a low price at Walmart. I have one in my truck.
There are two kinds of metal applied to the area under the doors. One is a real "rocker bumper" and the other is a running board. The running board has no place on the trail. It will be torn off. A slider is for sliding against rocks or trees. It is not a step.
I have looked at all of the sliders on the market. I prefer to build my own.

I have wheeled my Slee step sliders HARD the last two years, and they haven't been torn off, JUST MY ACTUAL EXPERIENCE OF COURSE.
 
I vote Slee step sliders. I got these because the wife wanted to be able to get into the rig with the 6" lift. But now I love these things!!! The protect the body real well and have saved body damage on many runs when I would have been into the body with "normal" sliders. They also provide a nice step :flipoff2:
 
Is there really a "best" slider?

Unless you have wheeled the snot out your rig and tested every available slider no one here can say what's the best. The handful of slider mfg's are about the only ones that can make that kind of statement and its more of a marketing plug than experience testing all the other varieties.

Who really cares who is the best anyway? So long as you're happy with your purchase and the protection they offer it just doesn't matter. There are other topics that warrant 2+ pages of bickering, this isn't one of them.

:shotts:
 
A slider is for sliding against rocks or trees. It is not a step.
I have looked at all of the sliders on the market. I prefer to build my own.

The step function tends to protect the very wide 80 without sticking out past the lines of the tires (you aren't "sliding against trees" with a tucked up slider...well, you are, but on the sheet metal).

This would not be true on most rigs, but it is on the 80. I wouldn't remove that feature even if I didn't like the step function, which I'll admit has surprised me because I am a weight minimalist and "high and tight" advocate on all mods in principle since I rock crawl.
 
Is there really a "best" slider?

Unless you have wheeled the snot out your rig and tested every available slider no one here can say what's the best. The handful of slider mfg's are about the only ones that can make that kind of statement and its more of a marketing plug than experience testing all the other varieties.

Who really cares who is the best anyway? So long as you're happy with your purchase and the protection they offer it just doesn't matter. There are other topics that warrant 2+ pages of bickering, this isn't one of them.

:shotts:

that nicely sums it up.

the most worked 80 I can think of at the moment is LaCabra. Rubicon, Dusy, Moab and everything inbetween. He uses Slee's sliders.

if they are solid and you are happy...well, can't say it better than the quote:beer:
 
One nice thing about all of these post is that no one has come up with a bad manufactured Slider.


Kudos to all of our venders for good products. :cheers:
 
Thanks!

Ok, Thanks everyone for your feedback on sliders. It is appreciated and Im very sorry to the few that got upset:flipoff2:. It is nice to get some opinions though I do understand its almost impossible to say which are the "BEST".
I think I still like the sleesteps best but may still go with some metaltechs or hannahs are also an option for me...
Anyhow thanks again especially you guys that included a pic which is very helpful when comparing the different manf. I am also happy to see that nobody had a single complaint :cheers:
 
Back
Top Bottom