beadlocks

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2005
Threads
31
Messages
120
Location
arkansas
I have a 79' fj40 and am almost done with the resto on it. I was wanting to put on some beadlocks and was considering my options. I would like to use allied monsters but they are only available with the 17" wheels. I am putting in a full floating rear and eventually rear disc brakes, so my question is can I run the 17" wheels without any problems and if so should I go with 3.5" backspacing or a little less like 3.25"?
Thanks
 
Youy can run 17" wheels. there is no issue there. But the BS should be checked. They shouldnt hit anything on the front (which is where there are usually issues) with either of the BS's you stated.

search 17" rims work just like 15" its tire size thats an issue.

Why do you want beadlocks?
 
why wouldint you want beadlocks?? ;)

17" should give you the option to go with any backspace..

What Tires? what width Rim?


If i had an extra $1000+ in my budget i would buy a set of 17x9 Beadlocks with a 2 or 2.5 backspace.. Wrap them in 37" tires.. that way i would not need Wheel Spacers..
 
Not sure if there are too many 17's out there with backspacing to fit stock cruiser disc front axles. Guessing from my semi-floater TSM disc conversion that whatever you get to fit the front will work with the rear discs. Good luck - while I really wanted to go with 17" beadlocks it was the tire prices that killed that route for me...
 
I'm doing a ome springs, shackle reversal, (about 4.5" of lift) so I'll go with the 17x8 allied monsters probably. I'm going to go with 35's for the time being, but may step up to the 37's eventually.
 
isotel said:
why wouldint you want beadlocks?? ;)
..

If you dont need them there is no reason to waste $ on them. I was trying to get more from the guy he does have single digit post count.

Sure I wouldnt mind them, but I certainly can spend that $1K , if I had it. On mor eimportant things.
 
I talked to the guys at High-Impact and they said that they could custom make the 17" allied monster beadlocks with a 2.5" backspacing before having to do a reverse wheel. I was looking at the IROKs and the Pitbulls, but their narrowest tire is 13.5". Could I run a 13.5 inch wide tire on an 8" wide wheel or should I step up to the 17x10 wheel.
 
I would go with 2.5" bs it is a lot more stable.. and keeps the bigger tires off of the springs
 
Back
Top Bottom