battery box cable grommet part #??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 13, 2013
Threads
145
Messages
1,697
anyone know the part number for the grommet in the battery box?
I was at Toyota yesterday but they couldn't find it, it didn't show up on their diagram.
If you know of any aftermarket grommets that will work, I'm sure it will be a lot cheaper :P
Thank you in advance.


DFE8193A-4E7F-420A-95CA-E5E80B282C5E_zpsmtuoziux.jpg
 
I need a couple of those too now that you mention it. Thanks for the part number!
 
anyone know the part number for the grommet in the battery box?
I was at Toyota yesterday but they couldn't find it, it didn't show up on their diagram.
If you know of any aftermarket grommets that will work, I'm sure it will be a lot cheaper :p
Thank you in advance.


DFE8193A-4E7F-420A-95CA-E5E80B282C5E_zpsmtuoziux.jpg


It's funny. You know why Toyota parts guys can't find these grommets? It's because they aren't in the "battery" schematic.

They are actually in the wiring harness schematic and are associated with the wiring harness. Which is technically correct. They are structurally a part of the battery box, but operationally they are a part of the wiring harness world. Weird stuff.

Just like the fact that the inner axle seal for any solid axle truck is not a part of the front hub or even the front steering knuckle schematic. They are actually in the front axle housing schematic because they operationally make sure that grease doesn't migrate inward and gear oil doesn't migrate outward in the axle housing itself.

Whenever dealing with finding Toyota parts in a schematic, you always have to think about how the part operates "operationally"--i.e., "what it does" not "where it is" ;)

Anyway, just some parts geek stuff for you all.
 
Plan B is to take some rubber hose (vacuum, heater, fuel), slit it lengthwise, and then press into the battery box holes. I did that 10 years ago and it hasn't moved.
 
It's funny. You know why Toyota parts guys can't find these grommets? It's because they aren't in the "battery" schematic.

.......

Whenever dealing with finding Toyota parts in a schematic, you always have to think about how the part operates "operationally"--i.e., "what it does" not "where it is" ;)

Anyway, just some parts geek stuff for you all.

Precisely the reason I never found them in the diagrams after having been trying to find the p/n for years! Also the names of things that we (the regular schmucks) use for parts often differs from 'internal industry speak'. I see that a lot in the steel industry (which my work services because we do the rail haulage provision) where terminology is quite unlike what you might think being an 'outsider'.

People who are experienced parts interpreters earn their money because they know all this stuff. ;-)
 
Back
Top Bottom