axles (1 Viewer)

Poser

Oh...Durka Durka Durka.
s-Moderator
Supporting Vendor
Joined
Oct 1, 2003
Messages
20,455
Location
MN
Welcome.


What size nuts are on the studs that retain the differential into the axle housing?

Do you have any pictures of your front axle?
 
Joined
Sep 29, 2014
Messages
8
image.jpg


image.jpg
 

Poser

Oh...Durka Durka Durka.
s-Moderator
Supporting Vendor
Joined
Oct 1, 2003
Messages
20,455
Location
MN
The companion flange on that differential would indicate that it is a 1968-1974, however, being that those are pretty easy to swap I would not go off of that alone.

The 10mm studs/14mm nuts retaining the differential housing to the axle housing indicate that it is post 1968 and later, as the 1967 and earlier had 8mm studs and 12mm nuts.

If you can post up a picture of the wheel cylinder plumbing, we might be able to narrow it down a bit more.

Man a fre still has those disc conversions? I was not aware that they were still peddling those things.

Huh, there they are; http://man-a-fre.com/parts_accessories/FrontDiscBrakeConversionKits.htm



43512-FT40KITN is the kit you will likely want.
 

Users who are viewing this thread

Top Bottom