axle rebuilds?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 17, 2005
Threads
93
Messages
343
Location
wenatchee
before I got my cruiser it had been sitting for some time, like 14-16 years, and now I'm working on and I dont know about the axles.
should I rebuild them?
what should I replace?
how much time to do this?
and how much $$?


and we just got a auto-zone in town, are there parts any good? and what about price wise?
 
I just redid both of my 77 axles.

Rear axle got new bearings, axle seals, pinion seal. 80 weight, brake shoes, hard lines, drums turned. coat of spray paint. Total cost around 80-100 bucks.

Front axle. new rubber hoses, 35 bucks, New hard lines 6-7 bucks. Calipers, FREEBIE, but would have paid around 95 for loaded ones with pins, pads and springs. Rotors. after the third try, 100 bucks or so with shipping. Kuckle rebuild kit from Kurt 85 bucks. Grease, A lot of it, Molly, 20 bucks or so. 6 rolls of paper towels.. Mini Truck birfs 70 bucks for the pair. Wheel bearings and races, 40 bucks or so. Pinion Seal 6 bucks or so from dealer, Mini Truck hubs. SPENDY now a days.

I would say the front to redo everything was around 400 or so. Plus I got free help and labor on it.
That was to do everything though and upgrade to Mini truck birfs. if you rotors can be turned you save some money, Same with the calipers, if you just need new pads it cuts the cost.

GO TO ROCKAUTO.COM for ROTORS< AUTO DRONE F'ED ME 2wice.....
 
B6i6K6e6R6b6O6y said:
before I got my cruiser it had been sitting for some time, like 14-16 years, and now I'm working on and I dont know about the axles.
should I rebuild them?
what should I replace?
how much time to do this?
and how much $$?


and we just got a auto-zone in town, are there parts any good? and what about price wise?
Depends on what condition they're in/how stored. Have you determined what they need or are you shooting at the moon? Your questions cannot be answered intelligently based on the lack of information you provide. Be more specific and you will get lots of help.
Ditto for your second question. Depends on many factors including what you're buying, the brand and how intelligent the person working there is.
 
agangle what do you mean how it was stored? it was parked in a garage. I'll try to more specific. I mean like what bearings, and seals should be replaced before I drive it. I'm still new to this, I havent had the cruiser that long. so if there is anything eles that should be replaced that I dont know about let me know.
thanks
 
I thought you had enough info.... Anyways, learn by taking it apart and inspecting. Its not too hard and when something does go wrong in the future you have been there and are confident in whats there and the condition the parts are in. Look in the archives or tech links for how to's if you are unsure about how to rebuild the front and rear ends with respect to wheel bearings, brakes, steering knuckles etc. I think auto zone is good and in my experience you will be hard pressed to find someone selling quality bearings for less. As far as seals and gaskets, I have had very good luck with Marlin out of Fresno CA and they ship really cheap. You can get all the seals and bearings for a couple hundred. As you take apart and inspect look for wear obviously and play is not generally a good thing. There is no simple answer to whether or not you should rebuild as not everything may need to be replaced. Sorry, cant offer advice on the diffs as I send them out. Good luck and ask questions. Not everyone minds answering. Good luck, Eric
 
B6i6K6e6R6b6O6y said:
agangle what do you mean how it was stored? it was parked in a garage. I'll try to more specific. I mean like what bearings, and seals should be replaced before I drive it. I'm still new to this, I havent had the cruiser that long. so if there is anything eles that should be replaced that I dont know about let me know.
thanks


You pretty much got it. Bearings and seals ;) . Take it all out and see what's bad.
 
A local shop quoted me $650 just labor to rebuild mine on a FJ60 not including parts. It wasnt that hard for me to do on my own, make sure you have a good slide puller, snap ring pliers and hubsocket.
I ordered as many seals and bearings in kit form from SOR. It was cheaper then all the places I tried. I ended up getting the inner/outer front bearings locally though... I cant remember how much $$ I had in it all but it wasnt too bad, could probably find out with some digging.
 
my junk sat for 15 years and ive been driving it now and wheeling with it for the past 2.. THe only thing i replaced was the front Knuckle rebuild with my SOA and Cut+turn
 
Back
Top Bottom