Arizona Classifieds / For Sale / Wanted

[jkl72-40]

Price drop to $11,500 on my truck. Also the oil gauge is working and it's got a brand new battery.

still for sale? if so got pictures?

 

[Dissent]

I have 2 things for sale:

• Toyota (Denso) Reman alternator purchased at CBT 3 years ago. Working as expected when I removed it. $100
• Used (but in great shape) LCP Gen1 Spare Tire Carrier. Painted to match Oak interior. Fits up to 35" tire - $125

 

[Dissent]

SOLD - 2 More Things for Sale:

SOLD - 2x Stainless Steel front loader washer drums in excellent shape, they measure about 17" deep, 20" wide, the opening is 15.5" wide. Was intending on building a couple of fire pits with them. - $60 each

SOLD - Like new Park Tool PCS-10 bike work stand with handlebar stabilizer - $120 see link here:
Park Tool PCS-10 Home Mechanic Repair Stand https://www.amazon.com/dp/B000OZFJS4/ref=cm_sw_r_cp_apa_6WnhAbGEV9GZK

 

[Dissent]

I have a 3 year old Toyota (Denso) Reman alternator purchased at CBT. Just swapped out for a 150A Sequoia so I have much more output at idle and don't need this one anymore. Working as expected when I removed it. $100.

I'd take $80 to get rid of this fancy paperweight. Any takers?

 

[Dissent]

2 More Things for Sale:

2x Stainless Steel front loader washer drums in excellent shape, they measure about 17" deep, 20" wide, the opening is 15.5" wide. Was intending on building a couple of fire pits with them. - $60 each

SOLD - Like new Park Tool PCS-10 bike work stand with handlebar stabilizer - $120 see link here:
Park Tool PCS-10 Home Mechanic Repair Stand https://www.amazon.com/dp/B000OZFJS4/ref=cm_sw_r_cp_apa_6WnhAbGEV9GZK

 

[mtkreitz]

Copper 3 row radiator and aluminum twin-fan shroud for 95-97 FJ80 Land Cruiser. Metal (not plastic) top/bottom caps.

Setup for (2) SPAL VA13-AP70/LL-63A fans (not included)

Installed and only run for about 100 miles while testing my V8 conversion. Truck ran hot with this setup so it was swapped out for a Ron Davis aluminum radiator. I expect it would cool a stock FJ80 fine, but I have never tested it with the straight 6.

$200

 

[re_guderian]

For sale in my hood, not mine...

 

[TWILLY]

Sold - it found a good home and a nice 80.

ARB steel mesh rack and mounting kit for sale.

• $750
• Largest size for the 80
• Less than a year old.
• Some paint chips along three of the towers and one on the inside of the rail.
• Otherwise in great shape.

Making room for a Campteq. Pick up in FLG or I can meet you in PHX or somewhere in between.

 

[Saddletramp]

You need to keep up. Believe you can still get new OEM sides for the bed. Can't remember rigjt now has them. Tailgate and rear valance are being reproduced by Awl_TEQ. Think two or three of Kevin's complete beds made there way to AZ.

Following in another thread it looks like a full replacement body is about $15,000.

Will have to keep this in mind, but I still would rather find a base rig without so much character

 

[Ken in AZ]

SOLD!

 

[Ken in AZ]

Anyone have 2.5 inch lift coils laying around? I know they're in high demand, but I figured I'd ask before going whole hog on a lift kit.

Alternately, does CSC have a hookup for suspension components?

Thanks!

I just posted a set of front 2.5" lift OME 851 on the AZ trade

 

[Skrugg]

I just posted a set of front 2.5" lift OME 851 on the AZ trade

I just got a complete setup from Murf.

Thanks everyone who responded!

 

[Funner]

I just posted a set of front 2.5" lift OME 851 on the AZ trade

View attachment 1735631 For sale - OME 851 front coils - used. 50 bucks

Hi Ken,
I will take these. Please PM me a number and I will call you.

 

[Ken in AZ]

Hi Ken,
I will take these. Please PM me a number and I will call you.

Just sent you my phone number. I am off work today so give me a call

 

[Dissent]

I still have an LCP Gen 1 tire carrier and an OEM alternator for sale.

 

[Ken in AZ]

I have 2 things for sale:

• Toyota (Denso) Reman alternator purchased at CBT 3 years ago. Working as expected when I removed it. $100
• Used (but in great shape) LCP Gen1 Spare Tire Carrier. Painted to match Oak interior. Fits up to 35" tire - $125

Tire Carrier. Is this the one that mounts the spare standing up on the drivers side in the rear storage area of an 80? Will it work with a storage attic and a 35” tire? If so I would like to buy it.

 

[Dissent]

Yes, that's the one. I only had a 33" under my attic but had planned for a 35". Measure from your floor to the rack to ensure your 35" will fit. PM me for details.

 

[D1EZEL]

Making some changes, PM for the CSC price.
For Sale - 2003 LX470 Fully Built, 3X, 4.88

 

[Saddletramp]

Yes, that's the one. I only had a 33" under my attic but had planned for a 35". Measure from your floor to the rack to ensure your 35" will fit. PM me for details.

@Ken in AZ
Yes it will work with a 35” tire and the attic rack. Several people are running this set up.

 

[LandCruiserPhil]

Tire Carrier. Is this the one that mounts the spare standing up on the drivers side in the rear storage area of an 80? Will it work with a storage attic and a 35” tire? If so I would like to buy it.

Ken as Steve said it will fit with ~3" of clearance. Perfect for securing a roll of paper towels