Any Ideas

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2005
Threads
7
Messages
83
Location
IDAHO
I Have A 1964 Fj40, And I Am Currently Having A Hard Time Figuring Out What To Do About My Axles I Want To Run 35's, And Install Disc All The Way Around. I Have Done Searches For A Birfield Conversion But Have Found None, And I Dont Really No If That Is Even Possible. Is Ther Any Other Axles I Can Swap With And Have Minor Modifications To Do ?
 
69 and later axle with be fine spline and birfield. The pinion flange might have to be changed to match driveline. Can convert the front axle to mini truck disk brake and back axle can use a kit to convert to disk brskes. After Sept. of 75 the front axle went to disk brakes. but when to 3:73 in 1979.


John
 
So The Front Can Be Coverted Instead Of The Old Brass Looking Ball Thing
 
I have a 65 and ran 35's for 2 years with no major problems. Most of my wheeling was pretty light though.

I ended up picking up a set of axles out of a 69 Cruiser for $200 and converted them to disks all the way around. I did the mini pu conversion on the front axle and did a Chevy disk conversion on the rear. I also installed Aussie lockers in both axles.

I'm getting close to finishing this upgrade and can't wait to try it out.

BTW. I got all the info to do all this from the tech pages of IH8MUD. :)


100_0521.JPG


Rear%20Disk%202.JPG
 
from my understanding, everybody has trouble with the rear disk brakes. they can't get the line pressure right and the rear brakes always lockup before the front brakes. i have this problem also. maybe disk in the front and drum in the back is the way to go unless you just need all disks for climbing on rocks.

my .02
 
missipboy said:
from my understanding, everybody has trouble with the rear disk brakes. they can't get the line pressure right and the rear brakes always lockup before the front brakes. i have this problem also. maybe disk in the front and drum in the back is the way to go unless you just need all disks for climbing on rocks.

my .02

Or you could just get a proportioning valve....
 
Well, that should work, but there was another recent post that made it pretty clear that even with a prop valve, some still had the rears lock up too soon. Most of the guys were running the Wilwood valve that reduces a max of 57%. Maybe someone makes one with more reduction. I didn't think I had a problem until two big does ran out in front of me doing 60mph and when I hit the binders the rears locked up.

Ed
 
would 2 wilwood valves in line reduce the pressure to 57% twice? or am I off in space?
 
here's a suggestion... maybe refer to the nature of your question in the title :) makes it easier for those in the know to identify a worthwhile post.

why not just grab some post 69 axles, throw in a mini disk conversion (use the mini /60 series birfs) with the mini/ 60 series locking hubs, and it'll be as strong as you can go using toyota parts.

i would just clean, adjust and repare any non functioning parts in the rear drums and use them.
 
Back
Top Bottom