I will also air down when I can't get them in my garage. I haven't had to use my roller set yet. But I have them just in case.
Another cruiser gets a vortec
- Thread starter gswest
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #122
Yeah, Yeah, Yeah, Pictures, gimme pictures!!
Those shackles and shocks are a nice surprise. Thanks man. I guess I've got to get the tires now to complete the look. My wheels on the Z say the wheel width on the inside of the wheel; I wonder if those wheels show the same info?
Those shackles and shocks are a nice surprise. Thanks man. I guess I've got to get the tires now to complete the look. My wheels on the Z say the wheel width on the inside of the wheel; I wonder if those wheels show the same info?
I looked and couldn't see anything, but I will check them out tonight in between to see if it does. I may just run one over there and ask them to fit one. But you did pick up 2" more of lift! I really like that, More lift, bigger tires and a meaner engine
Your telling me!! I have to get them down loaded to a disc so I can post at work!! Bad thing is my old computer is a POS and I can't get it to do anything for S#$%. And no it is not the operator! I will get something going real soon. Hey atleast you will get all of it at once.
- Thread starter
- #126
Lift is good! Bigger tires will be good too. I'll just wait for the right wheel width before I order them.
- Thread starter
- #127
Can't wait to see the truck sitting higher; my garage door may need a lift kit. I hope I remember to check it before I pull in for the first time; Ouch!
You should clear it OK. It looks like it will be close on mine
I sure would hate to get it all together and it would have to stay in my garage
I sure would hate to get it all together and it would have to stay in my garage
- Thread starter
- #129
Yeah, that wouldn't be good!
Where is my update!?!?!?!?!?!?
- Thread starter
- #131
His home computer crashed; another one is on it's way. I'm dying to see the progress since the transfer case was done.
The engine is mated to the tranny, The transfer case is back together, Just need a Relunctor ring adapter for the tranny shaft. Once I get that it's all together and set it in the bay. The tunnel area has all been cleaned and re undercoated. The new B&M shifter arrived on Sat. 
So I will have pics soon. New Dell should arrive tomorrow then I can post all the progress. Hang in there guys I will post progress pics hopefully tomorrow.
So I will have pics soon. New Dell should arrive tomorrow then I can post all the progress. Hang in there guys I will post progress pics hopefully tomorrow.
I Finally Got A Computer!!!! I Will Be Posting Up Pic's Tonight!!
Finally
OK here we go so if somethings seem out of order I haven't gotten it off of my hard drive. But enjoy!
OK here we go so if somethings seem out of order I haven't gotten it off of my hard drive. But enjoy!
next set
Tunnel cover and the shackles going in.
Tunnel cover and the shackles going in.
next set.
This is the clean up on the shocks
This is the clean up on the shocks
Next set
TCI kit and transfer assy. I do have pics of the teardown but again on the other computer
TCI kit and transfer assy. I do have pics of the teardown but again on the other computer
Next set
This is the tranny and transfer cleaned up.
This is the tranny and transfer cleaned up.
Next
OK so that is it sorry for the jumble but I have somemore pic's to post but once I get them off the other computer I will get them up. I hope you all out there didn't think I was taking it easy!
OK so that is it sorry for the jumble but I have somemore pic's to post but once I get them off the other computer I will get them up. I hope you all out there didn't think I was taking it easy!
Looking good!
I just ordered all my gear from Downey. Jim was great. He talked to me for about an hour. I also ordered my tranny from toyotapartsdirect. $1595 new with free shipping! Now I have to put my credit card away, I can't see from the smoke coming out of the thing. I guess I have a couple weeks to get everything all prepped. It is pretty scary looking there in the garage, but Jim made it seem like not too big a deal. hmmm, where's that grinding disc....
I just ordered all my gear from Downey. Jim was great. He talked to me for about an hour. I also ordered my tranny from toyotapartsdirect. $1595 new with free shipping! Now I have to put my credit card away, I can't see from the smoke coming out of the thing. I guess I have a couple weeks to get everything all prepped. It is pretty scary looking there in the garage, but Jim made it seem like not too big a deal. hmmm, where's that grinding disc....