Another 5.29/35 status report

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 27, 2006
Threads
158
Messages
2,084
Location
San Diego
Well, I got to wheel my rig this weekend so I figured that I'd post my observations. Just so we're all on the same page, I re-built my axles and brakes recently and decided to re-gear at the same time. I ended up going with the front gears from Longfield and the rears from Ringpinion.biz.

My first observation is that you feel you rig shifting alot quicker/sooner. I thought that there might be a little more "seat of the pants" improvement but it doesn't really feel any peppier during normal driving. If you really put the pedal down, there is much better response and acceleration.

Now my biggest priority is wheeling so my observations will be portray that. I drive very little on the freeway unless I'm on the way to my wheeling destination. That said, to me, the gears feel really good at highway speed. The RPM's don't feel excessive. However, even with the new gears, I pretty much don't exceed 68-70 MPH ( I just checked my GPS and my top speed for the last few hundred miles was 66 MPH;))

Once you put it in low, it becomes a completely different animal. I have become pretty used to my rig and I'm pretty interactive; shifting from hi to lo constantly, using 2nd start regularly and shifting manually. Up until now, I feel as if I was extracting the highest level of control possible. The new gears have definately upped the ante. The difference off road is pretty staggering. In short, I love it! Climbing has become so smooth and effortless and downhills don't require nearly the braking force I used to exert.

I had been planning on running 4.88's for quite a while ( I actually bought a set for the front). It wasn't until the last minute that I decided to go with 5.29's. I'm completely glad I did. Truth be told, I think I'd be happy with even lower gears if they were available. I'm still on the fence when it comes to 37's but if I take the leap, there's no question that the 5.29's were the way to go.
 
PM if you deside to sell the 4.88's
 
No problem. Slomo's already got first shot at them. If he changes his mind, you can be 2nd:)
 
I could tell that those gears were LOOOOWWW when you came down that steep a$$ hill and said that you weren't using the brakes. The 5.29's just were low enough to lock the wheels up. That was pretty funny.

I was on my way in the near future to get the 4.88's, but your vehicle changed my mind. 5.29's it is! Then I can do the 37's when these Toyos go away :D
 
5.29's just seem to low to me.

Must admit I'm kinda suprised to hear that they were fine in your opinion on the highway.

Have you done any gas calculations for the highway?
 
(searches for even lower gears)
 
5.29's seem appropriate for the tires he is running as they weigh in a 115 lbs with stock rims. Even though he is at sea level, turning those heavy tires requires a little extra oomph IMO.
 
Hmm, I guess my monster tires aren't that heavy.

The tire alone is 116lbs.....I just weighed an LX450 rim in the garage and got 21lbs.

137lbs a wheel for me....but its the size that completely throws off my gear ratio.
 
Have you done any gas calculations for the highway?

Like I said, I rarely drive on the highway but my preliminary guess is that there isn't much change from stock. I can do some overall calculations when I get home.

what was the rev counter saying at 66mph?

I have no idea but if you measure your RPM's at 77 MPH, I bet it would be close.

5.29's seem appropriate for the tires he is running as they weigh in a 115 lbs with stock rims. Even though he is at sea level, turning those heavy tires requires a little extra oomph IMO.

I believe that 4.88's with 35's are way to close to the stock ratios. The problem with merely addressing the ratios is that you aren't addressing the added weight. So you're right and that's why I ultimately chose 5.29's.
 
what was the rev counter saying at 66mph?





66 x 5.29 x .75 / 35 x 336 = 2,513


I have no idea but if you measure your RPM's at 77 MPH, I bet it would be close.






77 x 5.29 x .75 / 35 x 336 = 2,932






and for my next tick!


images
 
Last edited:
tntoyota; said:
66 x 5.29 x .75 / 35 x 336 = 2,513

77 x 5.29 x .75 / 35 x 336 = 2,932

and for my next tick!

images
:confused:

Does d0ubledown have 5.29's?
 
I know that when my speedo reads 77, I am really doing 66 (per GPS). That was my reference.

My corrected MPG for the last few hundred miles which included highway, city, and off road/low range was 10.4 MPG.

While I definately wish my milage were better, I have accepted the fact that I have chosen a gas hog for a pleasure vehicle:D

I drive so little that I'm less concerned about the fuel expense than the cruising range.
 
A couple of things:

Yes, they are too sweet offroad, aren't they :cheers:. It is class changing.

Your shift points are way off, which is why it feels what sounds like "jumpy" with those quick shifts off the line. Get a Yellow Box for $100 and then calibrate it with your GPS. Leave PWR on. You will be amazed. It will still be a pig (it's an 80 without forced induction), but you won't be hard on the throttle anywhere except the steep uphills and it will hold your shift points.

5.29 with 35's runs 2,900 RPM @ 75 mph (GPS calibrated speedo correction). If you like to drive at 65 mph, they are beyond perfect, smack in the power band. If you like to drive 75 mph, you'll feel that "wall" more than you want to.

All of this is consistent with your chosen bias. If you have an 80 on 35's and have maintained a focus on 75 mph+, 5.29's aren't for you. If you are more offroad focused or simply don't think it is smart to drive a lifted solid axle rig on big soft 35" offroad biased tires really fast and stick more to 65 mph, then 5.29's are perfect and for exactly zero extra dollars you will get a nice extra kick offroad.

But you will need to do the Yellow Box to really dial in the onroad gains, and PWR on continues to make a huge difference and is very well mated to the new low gearing.

I think a lot of people would go even lower if they could. You only give up top mph at low RPM. Going one ratio lower than stock on these engines is extremely viable (I have done it before) and I am glad to see more people taking advantage of this option when it is a good fit for their usage.

Nonetheless, 4.88's will be the best match for most users. There are no rules here, you are just playing within a set of rules tightly prescribed by an automatic transmission for whatever bias you are after.
 
Are you saying that the yellow box will have an effect on the ECU as well as the visual speedo? I had done some reading and was leaning towards the Speedo Healer as it is more finely tunable and can be purchased in the US. Unfortunately, I don't think the Yellow Box site is as informative about their "new" product as is Speedo Healer.
 
Are you saying that the yellow box will have an effect on the ECU as well as the visual speedo? I had done some reading and was leaning towards the Speedo Healer as it is more finely tunable and can be purchased in the US. Unfortunately, I don't think the Yellow Box site is as informative about their "new" product as is Speedo Healer.

Yes, it is not just visual speedo. Pick the product you want to correct it, I said Yellow Box for the price and the fact that it has built in diagnostics and is correctable to .25%, which is as close as you need to be with +/- 28% total correction amount.

You can purchase the Yellow Box in the US, just Google it. But I'm not pushing that solution by any means, anything that works is fine.

In any case, it will correct your shift points - I had the same results as you before the speedo correction: sharp and early shifts. Speedo correction fixed that, but at my altitude even with 5.29's I find PWR on to be the best combo of the 5.29's getting up in RPM quicker, proper shift points with the Yellow Box, and PWR on holding the shift points longer.

I think you'll be surprised at how much difference the speedo correction makes - with a >15% variance you have now, you may find that this makes as much difference in feel onroad as the gears themselves.
 
Cool. Thanks Nay! I'll get right on it.:cheers:
 

Can't put 5.86 in an 8", can you? Or better said, they don't exist? And would have to be custom for the rear?

I rechecked my numbers today - my highway sweet spot is 68-69 mph running at 2,700 RPM. The whole platform is quiet and effortless. Much higher than that and the tires start to get louder and the engine starts to push just a little bit. As I've said, if 75-80 mph is your design goal, I'd get the 4.88's for sure, but 75+ didn't work for me with 35's and the stock gears because my tires were the first point of noticeable resistance anyway.
 
Last edited:
Back
Top Bottom