An HJ47 thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 28, 2004
Threads
433
Messages
5,845
Location
Divide, Colorado
I'm a little late to the party with this thread, but had an opportunity in 2014 to trade my 1973 FJ40 for a diesel 11/1983 production HJ47. Most folks are not real familiar with these long versions of our beloved 40 Series, so I thought I'd share the story on this one.

Shortly after importing it from Australia, @ColoradoCarlisle was looking to trade for an FJ40, as the HJ47 was a little too big to suit his mission as I recall. We both lived in the Denver metro area, so we met in the Park Meadows Mall parking lot and both left for test drives in the others' rigs.

I'd never driven something that was right-hand drive, which was interesting but a quick adjustment. Then, something about the sweet smell of that straight-six 2H diesel exhaust and the sexiness of the late, late model dash was just too cool to pass up. I was pumped. It leaked oil and coolant like a sieve, but the motor and transmission were tight as new and I was in love. He also dug the '73. It was a superb swap.

These were primarily used as work and/or military trucks around the world, so most of them saw hard use and abuse. There aren't a whole lot of decent examples left. This one was owned by a civilian and was taken pretty good care of.

Here is the day we met in 2014.
IMG_8362.webp
 
Once I got it home, the first order of business was the replacement of the leaking water pump and coolant temp sensor. While I was in there, I swapped in a new OEM belt, thermostat, and thermostat gaskets and bolts.

Next was an oil change and a new OEM filter. Much of the Exxon Valdez oil leaking was due to an old and weathered oil filter seal. Later, I'd tackle two more areas to finally solve the oil leaks for good: the old oil pan drain plug and the valve cover gasket.

Interestingly, when replacing the 2H water pump, you remove the steel housing from the engine block and swap out the impeller. Much less wasteful than swapping out there entire thing.
IMG_8569.webp
IMG_8573.webp
IMG_8571.webp
 
Around this time, in late 2014, I had accepted a promotion back at the home office in Dallas. I needed my daily driver truck in Dallas during the few months of transition. So, I drove the HJ47 as my Colorado daily driver during that time period. It spent many a night at DIA (per the pic below) as I traveled back and forth.

By June of 2015, we had fully relocated and I had it shipped down.
IMG_0977.webp
 
One of the only things I've never liked about the HJ47 is the lack of a rear spare tire carrier. I had noticed that even some of the high-end restorations had installed a year-appropriate tubular tire carrier. To me, it is an essential part of the 40 Series.

I lucked out and found one with matching original paint, and installed it. Interestingly, the lower c-channel bolts were already there from the factory.

After a few hours of measuring and re-measuring, I had it coming into place. I fabbed up gaskets and bolted her on with some new hardware.
IMG_1434.webp
IMG_1495.webp

Also around this time, I installed OEM Toyota wheels and 33 x 9.50 Super Swampers. The old KO2s were dry-rotted and needed to be replaced. Around this time, the HJ47 was beginning to take shape the way I'd intended.
IMG_1513.webp

IMG_1514.webp
 
Very nice Troopy, looks like a nice Thomas pto too! Been daily driving a Troopy for 5 years now! Great family and work trucks, very versatile!
Thanks. Yes, it is the Thomas PTO indeed.

They are definitely some useful rigs. It is amazing how much can be carried in the back of one of these.
 
Big Bend was an excellent experience, as always.

Chisos Mountains.
IMG_1595.JPG

Lunch under the shade trees along the Rio Grande near Boquillas.
IMG_1599.JPG

Boquillas river crossing across the Rio Grande.
IMG_1601.webp
 
Last edited:
And one of my happy places, Terlingua. This is one of those places that is magical to me.
IMG_1617.webp

Relaxing with the locals on the Front Porch.
IMG_1615.webp

Lunch, roadrunner watching, and excellent chips and salsa at La Posada Milagro.
IMG_1618.webp
IMG_1619.webp
IMG_1621.webp
 
This town really comes alive at night.

Excellent dinner at the Starlight Theatre.
IMG_1698.webp

La Kiva. It's a lot cleaner now than it used to be. I kinda miss the old one.
IMG_1703.webp

The Eldorado Hotel's High Sierra bar.
IMG_1696.webp
 
Wow, I remember watching “badlands” some crazy things went down in that town. La Kiva back to normal I guess?
Yeah, after the owner was killed in the parking lot in 2014, it was bought by a guy from the UK if I remember correctly. We met him on a later (2017) trip. He wanted to make the place a lot more “upscale”, although I use that term loosely. It’s still very, very cool, but doesn’t have the same wild ass west feel as before.
 
After the Big Bend trip, it was time for a few tune-up items I'd put on my list. I had a severe oil leak at the top rear of the engine which turned out to be a cracked valve cover gasket. I'd also had some starting issues towards the end of the trip, which turned out to be a failing busbar connection. None of this stuff was available OEM any more, so I picked everything up from Ebay Australia. Pretty soon, she was back in business and went into storage for a few months.

In the Spring, I took her down to LSLC's Katemcy Rocks for the weekend, mainly just to reconnect with cruiser friends and hang.
IMG_2814.webp

IMG_2795.webp

Unlike a regular shorty 40 Series, you can comfortably sleep in an HJ47. There is close to 7 feet from the front seats to the rear amby doors.
IMG_2742.webp

IMG_2743.webp
 
In 2017, we joined up on the FJ40 Cross-Country Expedition to pass the "baton" across part of Texas. Met up with some great East Texas guys and took the day with my son to take part. Had some great BBQ en route and made a day of it.

This was a really cool concept that eventually fizzled out, at least temporarily. Id really like to see this "baton pass" come back to life: FJ40 Cross-Country Expedition: Will YOU join us???
IMG_6494.webp
IMG_6508.webp
 
By 2018, I was getting the mustard 40, Project Pikachu, finished up and had more time to put into the 47.

I took the rig on a 550-mile dove hunting trip in West Texas and she started running hot on some of the steeper grades. So when I came back, I had an old school shop do a radiator re-core. These shops are getting harder and harder to come by.
IMG_1302.webp

While in there, I ordered new MacKay radiator hoses from Australia, installed new OEM thermostat and gaskets, welded some small cracks on the radiator support, painted the fan shroud, and put it all back together.
IMG_1325.webp

IMG_1323.webp

In the engine pic, you will also notice that I removed the snorkel and found/installed the unobtanium air intake hose and bracket that I'd been looking for. Nice to find those small parts and pieces to make it whole again. I dork out on finding those obscure parts.
IMG_1290.webp
 
One afternoon, I caught a reflection down the side of the HJ47 and realized that this rig had evidence of the classic old school Toyota red/orange/yellow pinstripes on the paint. So, I found auto decals that matched those colors and the wife and I went to work bringing back its former glory. Was a lot of fun.
IMG_1804.webp
IMG_1812.webp
IMG_1814.webp
 
As much as we enjoyed our city, I continued to become more and more sick of the corporate world. We needed to get back to Colorado. This wasn't living life to the fullest.
IMG_2005.webp
 
Back
Top Bottom