Aftermarket Wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 6, 2016
Threads
2
Messages
12
Location
San Diego
I tried searching the forums to see if others have run into the same issue. So if its here and I missed it, give me credit for at least trying first before posting.

I have a 2000 LC with stock 16" wheels that are starting to look a little shabby. So I went looking for a new set of wheels and keep coming up empty handed. Either because the existing wheels are 16", or (more often) because the bolt pattern is 5-0n150 .

So far the only thing I have found are some Chrome Pro Comps. which I don't care too much for. Mostly because they are chrome, but also because they are Pro Comp. I could get them Powder Coated, but still, they're Pro Comp and my understanding is that Pro Comp is a 4WheelParts company, and I cant stand those guys. (Long Story)

So my question is, have you run into the same issue finding 16" wheels with the 5-on-150 bolt pattern?

Oh, and yes, I do know I can run an adapter of some sort, I just would prefer not to.
 
There are very few options. You can get other Toyota Land Cruiser, Tundra or Sequoia wheels. Some may require a spacer on the front to clear the hubs. A couple of other options include Method and SCS wheels although they have limited styles and offsets.
 
Yeah, super tough to find anything good. I'm looking at getting some Hutchinsons + 35s next year:

Hutchinson Rock Monster Wheels for 5/150

But for now I'm going with SCS:
Land%20Cruiser3_zpsv0gpyjiz.jpg


5x150 SCS F5 Wheels 16x8
 
Volks used to be available in 16s in their large PCD line. Unfortunately the site only lists the large PCD in 18s now; I've been trying to get a cosistent answer from dealers on whether the smaller diameters can still be ordered. I've been wanting a set of 16s for years and haven't seen them come up for sale used.

Sam
 
Take a look at the 18 inch wheels. There's alot to choose from.
Ikarus, don't change out the ones you have, those are the best looking 16's Ive seen on a 100.
 
Thanks for the lead on the SCS. I just checked out the F5's and they are by far the best option I've seen so far. The website says they are currently only available in the Bronze color, but I'm going to shoot them an email to see when/if the Matte Black will be available again.
I knew I could trust the members here to steer me in the right direction. Thanks again.
 
Take a look at the 18 inch wheels. There's alot to choose from.
Ikarus, don't change out the ones you have, those are the best looking 16's Ive seen on a 100.
For sure, I love em. That's only if I decided i want some beadlocks
 
Ah figures, same here love the TE37X style but only 6 lug in 16"
 
I sandblasted and powdercoated the original 16" wheels on my 1998 LC, and I am very happy with the result. I think the original toyota wheels are higher quality than most of the aftermarket options.

The graphite-colored powdercoat looks awesome, and powdercoating your existing wheels is much less expensive than buying new wheels of the same size.

Those 5 spoke SCS wheels do look awesome though, and if you can get 4 for $700, that is hard to beat.
 
I'm really thinking of going bronze to be different on my mostly stock 2000, yes even with the running boards. Lol...
The joy of a project rig that was had at a great low price. I just don't want to drop a lot of coin on it and am looking for another LC to make the mod-mobile.

The flares are going to stay for now as with the mileage I have I don't want to deal with new paint underneath and all that. The other option would be to check the dealer for the adhesive to reattach if needed. The wife likes em, lol...

But the offset of the SCS would fit great, and the fact that at 423K the PO replaced the shocks with new OEM and aligned the rig. I might do a spacer in the rear and just lift via TB adjust about 1".

Looking at Grabber AT2s or the KO2 in 285 on the SCS wheels.

IMG_0763.webp
 
IMG_1925.webp
IMG_1923.webp
I have the SCS in Matte Black and love them. The stance is much improved over stock. I'm running 295/75/16 KO2s and had to do some minor trimming/re-shaping of my mudguards due to rubbing. I didn't have the rub with the factory wheels and the same 295s. It was easy enough to do the trimming and remedy the rub, but I'm not sure how that would play out with factory running boards, or if they would even rub.
 
Looks real good...

Wonder if a 285 would rub?

So is it the inside of the tire rubbing when your at full lock?

Cool you were able to remedy it by heating and bending the mud flap.
 
285s don't rub.
 
I have the ProComp 1069s ET -11 on my truck with 315s that I had from my 80 series. I hate it. Desperately. Like, they can burn in the seventh ring of hell. My Lexus looks like some redneck pickup truck with the wheels poked out from the side. It's slightly beyond hideous. At full flex my tire sits right at the fender, and doesn't tuck in on the front. And yes, running 315s I've had to do some fender liner and pinch weld trimming.

The ONLY reason that I bought them was I already had the $1400 worth of DuraTracs, and didn't want to deal with spacers on the factory Lexus chrome wheels for many reasons.

I'm buying the SCS's this spring.
 
Back
Top Bottom