adjustable panhard?? anyone who has a spare one???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanx! But, I`ve tried that adapter before. Pro Comp and trailmaster has this as well. It doesn`t work for higher than 2" of lift (in my opinion) and I will have 6".

The sun is about 3 weeks out... We have around 3hrs of daylight, if you can call it daylight...

I have ordered this one (the bottom one), but I still don`t think its enough. Maybe both???
All Pro Off Road
 
WarDamnEagle said:
Hey Knixen, sun up yet? :D

Just kidding. Here, try these brackets from 4Crawler. They're about half way down the page:

Toyota 2nd Gen 4Runner Coil Spring Spacers and Panhard Drop Brackets
Click to expand...

Never have figured out, yet, why the aftermarket companies for Toyota's seem years behind everyone else ;)

The correct way is NOT to drop the frame end, but to raise the axle end (and possibly use an adjustable trackbar, depneding on the amount of lift, in conjunction with the raised axle bracket).
One of the aftermarket vendors does sell a bracket that raises the axle end of the bar.



:)
Fred
 
FredTJ said:
Never have figured out, yet, why the aftermarket companies for Toyota's seem years behind everyone else ;)

The correct way is NOT to drop the frame end, but to raise the axle end (and possibly use an adjustable trackbar, depneding on the amount of lift, in conjunction with the raised axle bracket).
One of the aftermarket vendors does sell a bracket that raises the axle end of the bar.



:)
Fred
Click to expand...

Thanx fred! I know, All-Pro has that solution. But I still need to have an adjustable rod!

But why no-one makes this, is beyond me!

Check my link in my last post and you will find it!

Best regards and happy new year to all of you!!!

Knut
 
You must log in or register to reply here.

Share this page

Back
Top Bottom