AC compressor issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 21, 2007
Threads
151
Messages
1,514
Location
Logan Utah
So when I am running my rig for a long period of time the AC compressor will start to sound seized and it will start to smoke the belt, at that point i turn off the AC and the belt noise goes away. later i can flip the AC back on and it works fine for a while and then end up in the same position. I am guessing there is some kind of compressor oil that is low and i need to fill up.. am I on the right track ? or are there other things that i should be looking at?

-mike
 
If your AC belt is old/tired/loose, it may be tight enough to pull the compressor when it is cooled off, but as it runs it will get hotter and looser from the workload. Disregard if your belt is both new and tight.
 
High pressure cut off switch not working or as inkpot stated about the belt. Low on compressor oil is not the problem. If belt is tight, you really need to put a gauge on it to verify pressures.
 
Might be rebuild time. The coil could be damaged (coating melted), perhaps due to an old bearing. But the other suggestions are worth a shot first.
 
Back
Top Bottom