About to install the CDL switch.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2006
Threads
259
Messages
1,935
Location
Fort Apache: Victoria
First of all, how's this for luck? I went in to get a price on a CDL switch at the local stealership. Considering the F(Z)J80 was never offered in Canada, there's precious little chance they have one. I wanted to see if ordering one through the dealer would be cheaper than CDan or Slee.

So the parts guy says "oh, we have one. It's in the (off-site storage)locker. Has a scratch on it but we couldn't return it. Come in on monday and get it if you want it. How's $30 sound?"

I wonder what other goodies are in there...

Anyway, my question is can the switch be engaged at any speed/gear, or should it only be engaged/disengaged when stopped and in neutral? Does it have a safety like the FF/FR lockers do, in which it won't engage until it's safe to do so?
 
I wouldn't engage it while your driving on dry pavement and under 40 is fine for other conditions. I know Gumby has done it faster than that.

Probably some other threads with more details.

Search

Adavnaced option

80's forum

Key words "CDL fast"
 
There are a bunch of threads on this topic. Search & the FAQ are your friends. :)

You can engage/disengage it at any speed. There are no interlocks for the center-diff (once you install the switch).

Note that, if you leave the center locked and go over about 45mph, the ABS will remain disabled even after you unlock the center. It will auto-correct this once you turn the engine off and back on.

You'll also want to do the Pin-7 mod (check the FAQ) - this will "fix" your shift points when the TC is in low.
 
Hants - the pin 7 mod is about allowing you to turn the CDL off while in 4 LO, effectively giving you kind of a AWD Lo. I have not done this because I don't have a need for 2 lo (AWD Lo).

I do know a lot of people find it useful for towing and other driving conditions.
 
Hants - the pin 7 mod is about allowing you to turn the CDL off while in 4 LO, effectively giving you kind of a AWD Lo. I have not done this because I don't have a need for 2 lo (AWD Lo).

I do know a lot of people find it useful for towing and other driving conditions.

Yeah, I've read-up on the 7-pin mod, and I'll do it because it's there. I don't think I'll ever have a need for it, but I desperately want to fit in!
 
The 7-pin mod is easy to do (provided you're an average size person), and it offers you "options", even if you don't take advantage of it very often.

Good luck on your install.
 
Hants - the pin 7 mod is about allowing you to turn the CDL off while in 4 LO, effectively giving you kind of a AWD Lo. I have not done this because I don't have a need for 2 lo (AWD Lo).

I do know a lot of people find it useful for towing and other driving conditions.

Thanks for the correction, Ken. I had forgotten about the unlock in low "feature".

Per Christo's writeup, there are 2 benefits to the Pin 7 mod:

1) Allows unlocking the CDL in Low

2) Allows correct shifting in Low, regardless of CDL setting

The older 80scool mod of simply unplugging 4Low position sensor at the TC allowed #1, but then the ECU thought you were always in High, so shifted differently.

Christo's Writeup said:
What you have just accomplished is you have interrupted the signal from the transfer case that tells the lock ECU that you went to low range but you are still sending a signal to the transmission ECU telling it that you ARE in low range. Therefore the transmission will shift in the correct low range pattern. In addition you now have true manual control over center diff locking. It only locks when you tell it to without regard to transfer range selection.

I use Low with the CDL unlocked for most wheeling. I only start locking up when I need to. I get great maneuverability that way and no driveline bind up.

:beer:
 
I got to use my new CDL switch and pin 7 mod for the first time off road today. I love being able to unlock all diffs in 4 LO for tight turns, but I hate the fact that it enables the ABS again (I'm assuming it does, as the ABS light goes out). If the ABS is indeed coming back on with the CDL switch disengaged, that's certainly not ideal for sharp turns which are followed by hairy descents.

Is there an easy way to keep the ABS disabled w/ the CDL unlocked? Or maybe just disable ABS w/ 4 LO, but retain control of the diffs w/ the CDL switch? Just something I thought of today on a narrow ridgeline...
 
Is there an easy way to keep the ABS disabled w/ the CDL unlocked? Or maybe just disable ABS w/ 4 LO, but retain control of the diffs w/ the CDL switch? Just something I thought of today on a narrow ridgeline...

I permanently disabled my ABS, but I think if you just want to disable it temporarily (for wheeling or whatever) you could just pull the ABS fuse? Maybe someone more learned will say that won't work, but it seems to me like it would.
 
Pulling the fuse would work, you could also wire in a switch to synthasize the "cdl locked" signal to the ABS controller and trick it into ABS off.


but I dont understand why? when is ABS a hinderance?
 
I've had some pretty scary moments in HI range offroad when the ABS almost completely disabled my braking. I assume it's because the system senses a little bit of wheel slippage and reduces brake pressure, just as it is designed to do on pavement. No kidding, it feels almost like the vehicle is skittering on ice. I would assume the same effect could be observed in LO range going down a steep incline w/ ABS engaged. I've always heard that optimal braking in sand, deep snow, gravel, etc. occurs with a locked wheel.

I just found this article w/ a quick google search to support my observations:

http://www.4x4abc.com/4WD101/ABS_offroad.html
 
Back
Top Bottom