A/C Compressor Swap?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 19, 2006
Threads
254
Messages
2,013
Location
Tulsa, OK
Website
www.cardomain.com
Question:

If I swap the compressor and drier is it absolutely nessecary to have the system evacuated before refilling with 134?

In the past I converted the FJ62 to 134 by simply bleeding the system and refilling with new refrigerant; it worked great. What's the difference? Is a new drier a must for that matter?

Past experiences?
 
When you open the system, there is a big chance that particles will get in. I'd evacuate the system as best you can.
 
When you open the system, air takes the place of the refrigerant. Air has moisture in it, and H2O+ R134=hydrochloric acid. Not a good thing to have in your A/C system. By applying vacuum, you remove the air and the water boils off. 2% air in the system can make the compressor rattle and not cool as well as it could. I would apply vacuum for a minimum of 45 minutes.
Hope this helps,
Rex
 
FYI - My local Autozone did not have a manifold set and vacuum pump available for loan/rent anymore.
They said they were always returned damaged or missing pieces. They are even still shown on the "placemat" on the parts counter as loaner tools, but the part numbers have been removed from their computer system.
 
Got a neighbor / friend that does home A/C ?

They use same vac pump ...but fitting are like the good ol R-12 days

Ya may have to finagle a schrader (old style) fitting to the new....
 
Back
Top Bottom