80 series tie rod torque castle nut

[hward1]

whats the torque for castle nut on tie rod -- cant find it - thanks - thinking 65 lbs but not sure

 

[hward1]

67 i think i found it

 

[Sarmajor]

Torque is important for these nuts but remember that you have to get the split pin through the holes so somewhere there usually has to be a small compromise between torque and nut position.

 

[Malleus]

"Tie rod to Knuckle arm", 67-lb·ft (this is from the '95 FSM)

This is from the '96 FSM.