'76 Restore or use?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2019
Threads
4
Messages
77
Location
San Diego, CA
I just got this '76 AZ car and I have no idea what I bought really. Looks like it was originally green and changed to red when whoever went mars rover with the front. Used as a tow behind for most of its life it is showing basically zero abuse.
It's cool! I've always wanted one just didn't want a red one.
 
Last edited:
Nice 40! Suggest you just change all the fluids, filters, flush engine and radiator, and check the hoses and belts. Then just have some fun driving it around for a couple of years. By then you will have a better idea what you really need to do to it and what you want to use it for. Good Luck and enjoy
 
Agree with @Helipilot. No idea how much deferred maintenance there is on the 40 year old powertrain. And that’s all safety stuff, not cosmetic.

I’m currently servicing a ‘76 that never had it’s front axle torn into. Never. The Allen screws wouldn’t come out of the hubs and had to be drilled. Needless to say, original rotors that they just slapped new pads on. And the knuckle bearings? :eek:

www.marksoffroad.net
 
I’m currently servicing a ‘76 that never had it’s front axle torn into. Never. The Allen screws wouldn’t come out of the hubs and had to be drilled. Needless to say, original rotors that they just slapped new pads on. And the knuckle bearings? :eek:

www.marksoffroad.net


Sounds kind of fun actually.
 
Agree with @Helipilot. No idea how much deferred maintenance there is on the 40 year old powertrain. And that’s all safety stuff, not cosmetic.

I’m currently servicing a ‘76 that never had it’s front axle torn into. Never. The Allen screws wouldn’t come out of the hubs and had to be drilled. Needless to say, original rotors that they just slapped new pads on. And the knuckle bearings? :eek:

www.marksoffroad.net

I couldn't pass it up because it was literally across the street. Changing all the fluids today and getting all of the "patina" off.
 
I’ve updated a very old thread to make my point clear: there is zero chance of getting a 40 year old axle that doesn’t need an overhaul.

Knuckle Problem?

:cheers:

www.marksoffroad.net
 
Sounds kind of fun actually.
I’ve updated a very old thread to make my point clear: there is zero chance of getting a 40 year old axle that doesn’t need an overhaul.

Knuckle Problem?

:cheers:

www.marksoffroad.net
This one has all kinds of cool stuff. Cargo boxes are
I’ve updated a very old thread to make my point clear: there is zero chance of getting a 40 year old axle that doesn’t need an overhaul.

Knuckle Problem?

:cheers:

www.marksoffroad.net
I posted a thread for sale. Of course right after I get it a job pops up where I could never fix it...NY.
 
Back
Top Bottom