Got the same question over and over this weekend so I thought I would address it here. I was asked if our updated prices, promos, and coupons are only for the Black Friday weekend. The simple answer is No. We will be running all of our holiday promos, coupons, and updated reduced pricing through 12/20 of this year. So the discounts are good for another 2.5 weeks.
62 cup holders on 60 console
- Thread starter fj40z
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Over the last few years I have gotten a lot of requests to make something for the 62 Series that could hold the larger 36oz insulated bottles made by Yeti, Hydroflask, and others as well as the plastic sports bottles like the Nalgene. I finally had a chance to sit down and mess with the current 62 Series double cup holder design to see if I can modify it in a way that would meet those requests but still be able to hold the usual fast food cups, soda cans, grocery store water bottles AND the common insulated tumblers. I also needed to be sure it could hold a phone. Here is what I came up with. Please understand this is a prototype so we have a few little bumps and flaws in it that will be addressed in final production. What I need are a couple volunteers wiling to install these and give me feedback and pics. I don't have a 62 Series in the shop I can use anymore. I know fitment wont be an issue because I used our existing design as the platform. I mostly need pics of it installed and any thoughts on how to make it even better. If anyone is interested in helping me on this then shoot me a message and I can go over the details of what I need and the overall process.
Here is our original 62 Series cup holder installed so you have a visual reference as to how/where our design mounts next to the console. We will probably just offer both designs for folks who prefer to old style more, once we get the new one manufactured up up on our seller platforms.
MTB Land Cruise
SILVER Star
I think i purchase one of your cup holders for my FJ62 a while back. I can help you best i can. I agree those Yeti Type bottles are popular, but i'm not sure what size bottles i have. I can try the fit with the bottles i have.
andy....
from Los Angeles Area.......
A quick heads up; you have that cup holder installed backwards. The open notch for the phone goes towards the dash. Flip it around 180 degrees. That will allow the insert to drop all the way into the hole correctly. In reagards to the new design; do you have any Hydroflask, Nalgene or 36/40oz. Yeti bottles?
MTB Land Cruise
SILVER Star
i flipped it backwards when i was take the pictures a few minutes ago. I'm checking on the bottles i have right now. i check back in a few.
MTB Land Cruise
SILVER Star
Yeti brand, i only have three (20 ounce size) The others are no name brand, unknown number of ounces (but i would not place this size bottle in a cup holder). No Hydroflask or Nalgene bottles. Sorry i wasn't much help.......
Our old design can handle those 16-20oz tumblers already. The new design will be able to hold those insulated tumblers as well but also hold those bottles from your 3rd pic with the pink bottle in the middle. Those are what I'm looking for in regards to test fitting and pics. I will send you a message and we can get it all figured out and get a new version out in the mail to you.
MTB Land Cruise
SILVER Star
Ok, i'll take them out of the Donation Box and hold them for testing..........
Message sent.
Got a couple guys who are going to take pics and send feedback on the updated design. Now I need to move on to the next item. I had some folks ask for a triple cup holder. In the auto tranny setup there was not enough room to go 3 across because the shifter bezel was in the way and going to the other side meant it was hanging off and looked horrible. On the manual tranny setup the shifters are up closer to the dash and there is plenty of room for a triple. I have made a few of these in the last couple years so I need one of 2 things. For the few guys that have one of these, could you post pics of it installed? I want to start offering these to everyone but need some good pics. I'm not even sure if those guys are on this website. If none of those guys are here then option 2 would be; anyone willing to buy one of these at an extremely reduced price and then send me pics of it installed? If so, shoot me a message and we can go over the details. Just be aware that this ONLY fits in the manual tranny setup.
Anyone willing to install a triple cup holder in their manual tranny 62 Series? Just need to get a few decent pics. In the end it will cost you nothing. A free cup holder for your time. If interested, shoot me a message.
- Joined
- Oct 4, 2008
- Threads
- 192
- Messages
- 6,113
I have a late 60, same console as the 62. I'll give it a go.
Last edited:
Message Sent