40 series general tech and classifieds
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Bodean
Hot Damn
Wait, what just happened Todd?
It will most likely be for sale.
It started as trying to get the frame and axels. Ended up as a whole project. But I might get to go see the Grand Canyon!
I will be in the PHX area 4/19 and 4/20.... I am glad the deal came through
. 4/18-4/19 might be the dates I go.
5.3 auto tranny Orion.
After playing at superlift yesterday I realized it would be nice to have a little wider axles. Are any of you running spacers? What kind, what are your thoughts?
I have a set of (4) 1.5" Spidertrax spacers that will be for sale shortly. You're welcome to check them out sometime.
http://www.spidertrax.com/Toyota-1-1-2-Wheel-Spacers?sc=2&category=9987
I run a set of 1.25" from Cruiser Corp on the rear. No issues to date. But this does remind me that I need to pull the rear wheels and check the torque on the spacers. 
Thanks for all the input.
Should I get 2 inch or is 1.5 good enough?
Well Jordon, that is convenient. How much you wanting for these Jordon? How old are they?
Last edited:
I run a set of 1.25" from Cruiser Corp on the rear. No issues to date. But this does remind me that I need to pull the rear wheels and check the torque on the spacers.
Lash is right. Some more info would help. I have a 4 inch lift with SOR flares and 35x12.50 tires on (what I think are) D-window Pro Comp rims on the rear. 1.25" spacers push the tires just outside the flares by an inch or so.
I would say 1.5 then you can use any newer ifs/80 series wheel and still be fine. You will eventually be running 35s and I would say the 16" (315/75/16) is a better size due to it being a tad bit narrower than a 35/12.5/15 just my thoughts
Bodean
Hot Damn
Just to let you know I have wheeled all over that park with 35x12.5 tires. No spacers. With what you are running why would you need spacers. Just wondering...