3uz-fe transplant?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 27, 2011
Threads
3
Messages
15
Location
Christchurch, New Zealand.
Hey all,

Just wanting your input on the following engine/tranny transplant

-3uz-fe engine
-A650e transmission

Any possible issues with adapting to the stock transfer case etc.....
Your input would be greatly appreciated.

Cheers!

Andy.
 
Nothing is impossible, but the 3uz-fe is a very wide engine, I would expect lots of interference under the hood and you will have to relocate things. If you have access to a full engine and transmission with the ECU and TCU, it's is just a matter of getting the wiring diagrams and sitting down and matching them up. Fueling might be an issue?

As one of the first people to do a 2UZ swap, I say do it if you want but be aware you're going to be on your own, since no one has really done it yet. I kind of think if you are asking though, you might want to look at something else....
 
Thanks for the reply!
im asking because here in New Zealand, most cruisers are diesel. and a donor 2uz are very rare. basically found a whole front cut 3uz for $2500NZD(aprox$2000 usd) with 80kms...
i thought the uz family are very similar size?
 
Interesting, it would appear unless you got the later one with VVT-I 3uzfe , it would be higher in HP than the 1z(256 vs 220 HP) , but loose in torque of the 1fz (260 vs 275). may not be enough to worry about. But again horse power is not everything. Or the mid year up grade 261 Hp and 268 torque(hope that is the one you are looking at).

The later 3uz with VVt-I is interesitng, 290 hp and 300 torque.
6 speed auto would be cool.
 
Back
Top Bottom