Wanted 2 way T fitting for brake lines for 40 series

[cwags12]

Location

United States

Hey gang -- we're looking for this 2 way brake fitting for 75+ 40 series. It mounts on the passenger side frame rail and looks like this:

Need to replace our rusty one with a good one. Let me know what you have.

Thx,
Clint

 

[ToyotaMatt]

Hey gang -- we're looking for this 2 way brake fitting for 75+ 40 series. It mounts on the passenger side frame rail and looks like this:

View attachment 2978187

Need to replace our rusty one with a good one. Let me know what you have.

Thx,
Clint

MY WAG : Teq Out the Perimeter where there are NO stars Quality Pre-Owned parts :

- is your only hope


ask for @3_puppies .org

 

[Drake2]

SOR.com

is your only hope


ask for Mr. Paul

And why haven't you reproduced these yet? Opportunity lost? Are you sleeping????

 

[ToyotaMatt]

And why haven't you reproduced these yet? Opportunity lost? Are you sleeping????

low demand UNICORN part


i really don't dabble into life safety parts either .........

i like knobs and SEMA SPEC. concept vision mechanical parts

 

[hyhpe]

I’m not Mr. Paul but I do have one. P

 

[ToyotaMatt]

Hey gang -- we're looking for this 2 way brake fitting for 75+ 40 series. It mounts on the passenger side frame rail and looks like this:

View attachment 2978187

Need to replace our rusty one with a good one. Let me know what you have.

Thx,
Clint

me thinks u need #6 on the SKUNK WORKS BOOT LEG EPC Diagram ?

i DO have #7 restored and powder koted if you need that .........

47311A	WAY(FOR FRONT BRAKE TUBE)
90413-10028 1970.07 - 1975.09 90412-10004 1975.09 - 1980.07 90412-10015 1975.09 - 1980.07

-

 

[cwags12]

Correct we need #6. Looks like we found more hope than SOR.

@hyhpe coming through in the clutch!

 

[cwags12]

I’m not Mr. Paul but I do have one. P

Great. PM sent.

 

[pardion]

Spector’s all out, Here is another for when @hyhpe runs out.

 

[ToyotaMatt]

Spector’s all out, Here is another for when @hyhpe runs out.View attachment 2978233

i can't believe i forgot about " John's TNK Restore and Quality Pre-owned Teq " ?


bad toyotamatt

 

[hyhpe]

Clint, you should get the one John has. I’m not in town. P

 

[cwags12]

Ok thx everyone for helping here! much appreciated

 

[3_puppies]

ask for Mr. Paul

HUH, I thought he was referring to me.

 

[ceylonfj40nut]

Why not weld two 90 degree brake fittings to a piece of angle iron? Same as this right?

 

[ToyotaMatt]

Why not weld two 90 degree brake fittings to a piece of angle iron? Same as this right?

sounds like :

 

[Ackcruisers]

I have one as well.

SOLD - New England: FJ40 Brake Line Union 9/75 - 8/80, OEM #90412-10004 Yellow Zinc.

FJ40, 90412-10004 - 4WAY(FOR FRONT BRAKE TUBE) Fits 9/75 - 8/80 $50 plus shipping

forum.ih8mud.com