2/80 carb strangeness

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 29, 2003
Threads
283
Messages
2,381
Location
Louisville, KY
I am coming to the conclusion, after looking at many many pics of other carbs for other years that the fj40 post 79-7/80 has a unique carb disimilar to ALL other carbs in the fj line. Has anyone with this year rebuilt their carb and found it to be the same? I should an AAP, and I do not. I should have a Primary that is smaller than the Secondary, I do not. I should have double and triple venturis, mine are the same i.e. triple.

Anyone?

Thanks
 
Hmmm. DIdn't we go over this on the phone?

AAP ONLY on 1975. Just an empty boss on the bowl casting for the other years.

Yes the primary is bigger than the secondary for 1979 and 1980.

Not sure what you're referring to with the 'double' and 'triple references. :confused:
 
Mark:

We did not ever speak about an AAP on the phone. Must have been something else.

What I am referring to when I say double and triple is what is listed in the FSM, in the 2F engine manual for an FJ40. It states that there exists a double and triple venturi as indicated by either two or three rings, in the venturi's design, within the throttle body. This is shown in the FSM i.e. it clearly illustrates two types of venturis. On my carb, there is only one type of venturi i.e. a triple.

Triple and double are exact quotes from the FSM which seem to reflect the number of rings on the venturi. It could very well mean something very different i.e. counter to what is obvious. I am not sure.

Anyway, Jim C, and now you, have confirmd that in deed the Primary and Secondary are actually different in that time period. I was confused because nowhere did the FSM state such. As a matter of fact, the FSM is pretty much useless with my carb. The linkage diagrams are off and the throttle body schematic is off.

Juke
 
Back
Top Bottom