1994 lc burnt value

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 26, 2005
Threads
124
Messages
796
Location
Wet side of Washington
So I am having a 94 cruiser delivered as we speak. It had a major fire in the interior. Engine compartment is fine, But all wiring inside is bad.

I haven't seen it no pics. But I told the guy I want it and he is bringing it as we type. 600.00 plus 150.00 delivered . I am hoping it has lockers but it probally dosen't. So I am thinking of swaping the drivetrain into my 60. Provided the engine runs

But there are lots of other issuse. If the engine is shot will be able to recoup some of my money?

The fire was in the back. Whole front end is good. Hood fenders and what not
 
insufficient data to make a guess
 
Now what?
Wait until light tomorrow and then assess what you've got. Even if it doesn't meet your needs you can certainly make your money back + pretty easily. Don't disregard the axles just because they don't have the OE lockers. Same for the rest of the drivetrain. If they aren't damaged by the fire you can certainly make use of them. Heck, you might find one of the same vintage that was totaled in a wreck that you can rob the wiring from. Either way I bet you made a good score, wait till tomorrow then take a closer look.
 
Wait until light tomorrow and then assess what you've got. Even if it doesn't meet your needs you can certainly make your money back + pretty easily. Don't disregard the axles just because they don't have the OE lockers. Same for the rest of the drivetrain. If they aren't damaged by the fire you can certainly make use of them. Heck, you might find one of the same vintage that was totaled in a wreck that you can rob the wiring from. Either way I bet you made a good score, wait till tomorrow then take a closer look.

Thanks, its tough to buy something sight unseen,But based on were I live and where it was I took a gamble. Its not fixable but I have been planning on doing a swap into my 60 was thinking of a chevy v8 but now that I have this I will be looking into a complete drive train swap. Its easy to see the appeal of a drive train swap if you aquire a drivetrain cheap.

First step figure out how many miles are on this. It appears well maintained. Good tires and fluids are good so I am crossing my fingers.

Thanks for the positive vibes
 
unfortunately the computer and part of the engien harness was in the cab
 
unfortunately the computer and part of the engien harness was in the cab

Will I stayed up half the night thinking about that. So now I need a plan. Sight unseen I could of sent him back with it. But I prommised I would give 150.00 either way for bringing it. So another 600.00 didn't seem to bad.
Going to work now post up ideas On wiring harness.

I will log on at 3pm hoping for ideas.
 
Need to see a lot more pictures. The ones you posted could be of any of the 1000's of white 80's. We need to see the damage in detail, what wiring is toasted, cut, etc.

Good luck. Parting out trucks sucks.
 
That 2nd pic sure looks like a fire under the bonnet to me.

I think you have a $750 burned out hulk but more pictures could change my mind.

-B-
 
That 2nd pic sure looks like a fire under the bonnet to me.

I think you have a $750 burned out hulk but more pictures could change my mind.

-B-
At this time I agree with you. But I have to keep reminding my selfon that the front and rear are good, tcase is good tranny is good. The wiring is shot so the engine will never run in this rig. But I didn't buy it to fix it.
 
Will I stayed up half the night thinking about that. So now I need a plan. Sight unseen I could of sent him back with it. But I prommised I would give 150.00 either way for bringing it. So another 600.00 didn't seem to bad.
Going to work now post up ideas On wiring harness.

I will log on at 3pm hoping for ideas.


Sorry to be a downer. you can get the ECU and harness used, possibly from another parts truck or one of the used cruiser parts places for not too much $$$


I saw the smoke stains along the left edge of the hood also, was wondering about that.

assuming the engine is good it was a steal.

if not you are down to transfer trans and and axles, wheels, grille, headlights, maybe even frame IF you can find a buyer, plus a bunch of small parts that add up, I still think you would be in the black overall selling the good parts, maybe even double your money. it will take a wile though.
 
Sorry to be a downer. you can get the ECU and harness used, possibly from another parts truck or one of the used cruiser parts places for not too much $$$


I saw the smoke stains along the left edge of the hood also, was wondering about that.

assuming the engine is good it was a steal.

if not you are down to transfer trans and and axles, wheels, grille, headlights, maybe even frame IF you can find a buyer, plus a bunch of small parts that add up, I still think you would be in the black overall selling the good parts, maybe even double your money. it will take a wile though.

Well I just got off the phone with a guy about swapping the axles into my 60 I know this is the wrong forum, But I am thinking of using the axles for my spring over swap into my 60. One reason I had been watching for a 80.


As far as the fire goes it appears based on the reside left behind that it started in the pass area. Then evolved into the wiring.

So most of the harness is shot (all) under the hood hence the smoke damage on the fender. But the engine dosen't appear to have become to hot.

I know that the 80 front is not a strong as the 60 I will never be running anything over 35's

This could turn into a build thread.
 
I know that the 80 front is not a strong as the 60 ...

Really? I have never heard this before. Can you list the reasons the 60 front axle is stronger than the 80 front axle?

-B-
 
Really? I have never heard this before. Can you list the reasons the 60 front axle is stronger than the 80 front axle?

-B-

I do know that the 60 front axle ring and pinion is the same size as the rear axle which could mean it's stronger, however I was under the impression that the strength due to the reverse rotation ring and pinion made up for it's smaller size.
 
Really? I have never heard this before. Can you list the reasons the 60 front axle is stronger than the 80 front axle?

-B-

I do know that the 60 front axle ring and pinion is the same size as the rear axle which could mean it's stronger, however I was under the impression that the strength due to the reverse rotation ring and pinion made up for it's smaller size.

I retract my statement. Would like to say "I have read that 60 axles ring and pinion are stronger than the 80 series." But I have no knowledge of that first hand.

I think I remember reading the the 80 front ring and pinion are not as strong as the 60 series ring and pinion. Something about the reverse rotation of the high pinion front however I have no first had knowledge of that either.

Step one cut all the burnt body off.
 
I think I remember reading the the 80 front ring and pinion are not as strong as the 60 series ring and pinion. Something about the reverse rotation of the high pinion front however I have no first had knowledge of that either.

I cannot remember anyone having R&P failure using stock 80 gearing other than 1 case where a soccer mom never changed the diff fluid and when Robbie tore it down the grease came out in clumps. It wouldn't even drain from the plug... too thick.

Anyone else ever hear of a maintained stock 80 front R&P failure?

-B-
 
Anyone else ever hear of a maintained stock 80 front R&P failure?

-B-


Only when doing recovery in reverse, something about that reverse cut high pinion being strong foreword but not back. pretty rare though.

the 80 birf is stronger than the 60 birf, but that 94 may or may not have the stronger drive plates, IIRC Dan recently stated it was a mid 94 change.
 
Back
Top Bottom