Wanted 1985-1987 FJ60 Transmission Cross Member (with frame mounts)

[OGBeno]

Location

United States

Looking for 11/1984-1987 FJ60 transmission cross member, ideally with the frame brackets as well. Let me know what you have available. Ready to pay.

Thank you.
-onur

 

[Living in the Past]

No frame brackets but I bought the cross member from an 87 some years back from Tim Hill. Also bought rear driveshaft from the same FJ60. Met another member there and bought a later pedal bucket 60. Had plans for a H55F in my FJ62. Too many project and just going to keep the slug it's always been.

 

[cruisermatt]

51322-60080 works well as a fresh option for brackets.. thanks for the order on all the other stuff earlier

 

[OGBeno]

No frame brackets but I bought the cross member from an 87 some years back from Tim Hill. Also bought rear driveshaft from the same FJ60. Met another member there and bought a later pedal bucket 60. Had plans for a H55F in my FJ62. Too many project and just going to keep the slug it's always been.

Is Tim even alive? I was there 3 years ago and he didn't look too great. And all he had left was, well, not really much.

 

[OGBeno]

51322-60080 works well as a fresh option for brackets.. thanks for the order on all the other stuff earlier

Thanks Matt! When are you coming up with a well-engineered crossmember solution for H55 conversions?

 

[cruisermatt]

Thanks Matt! When are you coming up with a well-engineered crossmember solution for H55 conversions?

I've considered it.. the simple answer is when I need one and can't get one for a reasonable price.
My situation for this stuff is a bit unique though as I am very keyed into exactly who is removing these parts for GM conversions and when

 

[OGBeno]

I've considered it.. the simple answer is when I need one and can't get one for a reasonable price.
My situation for this stuff is a bit unique though as I am very keyed into exactly who is removing these parts for GM conversions and when

Makes sense. Well, I'd be ready to buy a few in an instant! Especially for FJ62's.

 

[Living in the Past]

Is Tim even alive? I was there 3 years ago and he didn't look too great. And all he had left was, well, not really much.

I have one idea haven't been since I was there which was over three years ago. Dave Gore would probably knows.

Thanks Matt! When are you coming up with a well-engineered crossmember solution for H55 conversions?

I know Dave Gore AKA @lcwizard had one for the 40 series . Not sure he had one for the 60 series.

 

[mattressking]

McKinney in Australia has a good bit of options for swaps, their H55 brackets/crossmember is nice for 40s.

 

[OGBeno]

McKinney in Australia has a good bit of options for swaps, their H55 brackets/crossmember is nice for 40s.

McKinnon's doesn't have anything.

 

[OGBeno]

Bump. Still looking. Thank you.

 

[Bryan062087]

51322-60080 works well as a fresh option for brackets.. thanks for the order on all the other stuff earlier

Do you use this for both sides or only the left?

 

[cruisermatt]

Do you use this for both sides or only the left?

both sides - Quantity four.