1966 FJ40 value

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2012
Threads
130
Messages
992
Location
Kenosha,WI
I need some opinions on this 66. So my buddy's friend bought this truck in Montana a couple years ago and now he wants to sell it. He has $5100 bucks into it. I am in Wisconsin so I have my buddy taking pictures for me. He has been all over it and says it is rust free. It has a inline six motor, but I think it is a Chevy inline six that did run in 2015. My thought would be to restore this to original, but would I be able to find all the parts I need? I know you see people giving away 1 F motor from time to time are they still readily available? I would have to ship it from colorado to Wisconsin so that is a factor also depending on what I can get it for. I have a bunch of pics so I will see what I need to do to post all of them.

IMG_0093.webp


IMG_0094.webp


IMG_0096.webp


IMG_0130.webp


IMG_0099.webp
 
My opinion is from those pics its worth every bit or what he has in it.... and even a fair deal for what you would have in it after shipping. Id love to find something like that and gladly pay 5-6k with some info and knowing its PO.

Dedicated searching can yield most of these old parts or appropriate substitutes whether new, used, oem or aftermarket.
 
Just a quick look at the pictures I see the windshield is probably 63 or older. That is way it has the system to hold the windshield up. Can see the two holes for the clamp it should have. Windshield could be old enough to be not have cut for the defrost vents. In Wisconsin thing you would want those.
 
Just a quick look at the pictures I see the windshield is probably 63 or older. That is way it has the system to hold the windshield up. Can see the two holes for the clamp it should have. Windshield could be old enough to be not have cut for the defrost vents. In Wisconsin thing you would want those.

John , those upper brackets look like they are fastened with sheetmetal screws. So original 65 holes for hooks hooks could be hidden underneath. That would be consistent with the vent-type windshield frame and the diagonal air intake for the heater.

But yes, those are pre-64 brackets on there now.
 
Looks pretty solid from pics, nice clean dash with hardware. September 1965 build. Doors may be later (window vents are not bugcatcher) and along with cowl vent not sure they make sense for later '65 build (?) but heater fresh air vent certainly does. '66 on hanging tag is sale date.
 
Last edited:
John , those upper brackets look like they are fastened with sheetmetal screws. So original 65 holes for hooks hooks could be hidden underneath. That would be consistent with the vent-type windshield frame and the diagonal air intake for the heater.

But yes, those are pre-64 brackets on there now.


It is interesting it has the system. But with the vent in the center of the cowl it should not have the vent in the windshield. The cowl vent replaced the one in the windshield. Changed windshield explains the early windshield hold up system. I also see a nut added to angle the windshield forward which also points to a mix match. Can't see a picture of the bottom the windshield frame that shows it it has the cut out for derost vents.
 
My buddy is going to get a few pics of the lower windshield frame tonight.


Have your friend take some picture of the whole vehicle a ways back. That is a good way to see how it all fits together. Good to have close up pictures but the whole important as well. Things that don't line up are hard to pick out in close ups.

How about the Packers? From Wisconsin originally. Certainly better than the AZ Cardinals where I live now.
 
Back
Top Bottom