15" wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

slow95z

Always parting 80s
Joined
Jul 27, 2008
Threads
62
Messages
3,645
Location
Dublin GA
i know the early 80s had 15s but will the newer ones with rear disc accept 15 inch wheels? i know on my ls1 camaro we had to grind the calipers which is fine by me i just dont want to buy an entire new set of tires since i have some ATs for normal driving, MTs for fun and boggers for being a retard.... and i would like to use them on my 80 if i could. it would be nice to be able to swap the wheels and tires around from my 40 to the tacoma or to the 80 depending on what i was taking where.
 
i know the early 80s had 15s but will the newer ones with rear disc accept 15 inch wheels? i know on my ls1 camaro we had to grind the calipers which is fine by me i just dont want to buy an entire new set of tires since i have some ATs for normal driving, MTs for fun and boggers for being a retard.... and i would like to use them on my 80 if i could. it would be nice to be able to swap the wheels and tires around from my 40 to the tacoma or to the 80 depending on what i was taking where.
I sure hope they do fit, I will know that on Saturday.
My FZJ is on its way and I have tires/rims from my Taco. It would be very nice not to have them sell at the loss just to upgrade to next size.:rolleyes:
 
yeah exactly. i just hate to go to all the troublle of driving to my friends house where my taco/40 are stored and then take a tire off and do the whole swap when i could ask here from the comforts of my desk at work to find out lol.
 
Ha ha I hope there is enough LC's for all those people that got Toyota buyback
:hhmm:


:D
 
they probably won't fit
also, older 15" wheels won't even fit in front-- they hit the tie rod ends.

search Mud ... the info is out there
 
i know the early 80s had 15s but will the newer ones with rear disc accept 15 inch wheels?

The short answer is no, they won't fit.

We have heard that there are some 15" wheels that will clear but not any Toyota 15" wheels. When asked, we never did get a specific brand+model of 15" wheels, at least not that I can recall.

The conservative members of the 80-Section will not recommend grinding the rear calipers. The amount that has to be ground off is significant and a real issue with safety; be it a trail-only truck or a DD. If you are still considering grinding the calipers then at least ask one of us to assist you in finding the thread where this was covered in depth... before and after pics of what has to be ground off and testimonials from those that considered grinding, including Christo.

Remember, we are talking about your brakes here. This is the part of the truck that is supposed to stop your vehicle and keep you from killing someone's wife and kids and maybe keep you from killing yourself. Buy proper wheels.

-B-
 
X2 from me as well.
Search mud and you will find very little support for grinding brake calipers.
My opinion is there in other posts on this matter.
 
alright, well that sucks. i had done a search but i couldnt come up with anything specific which is why i made a new post. guess i will just sell off my 15s and buy all new 17s.... might as well step it up to 17s so i dont have this problem again for a while heh.
 
Pajero / Shogun 15" rims (7" wide) fitted fine on my 95 '80 without any spacers etc, but not on my '93 (hit the dust plates behind the rotors)

PS 17" are a pain to find off road tyres for (well they are in the UK anyway) 16" is way better
 
i know the early 80s had 15s but will the newer ones with rear disc accept 15 inch wheels? i know on my ls1 camaro we had to grind the calipers which is fine by me i just dont want to buy an entire new set of tires since i have some ATs for normal driving, MTs for fun and boggers for being a retard.... and i would like to use them on my 80 if i could. it would be nice to be able to swap the wheels and tires around from my 40 to the tacoma or to the 80 depending on what i was taking where.

I have 15x10 wheels on my 94 80, I had to grind the calipers just one or maybe two millimeters, nothing major. I've had no problems at all on my brakes, I've taken the wheels off 3 times just to check since I installed them 8 months ago and no problems at all... :flipoff2:
 
Back
Top Bottom