100 series center console

[skepter]

Hey guys, I just picked up a 2000 Land Cruiser, Brown exterior with tan interior, and I wanted to get a new center console cover (shifter and 4x4 lever area)

I’ve noticed that everyone is just cleaning and repainting theirs, does anyone sell a 3D printed version or any overseas replacement parts?

Thanks!

The exterior of my cruiser is in great shape but I’d like to replace or fix lots of interior parts, door panels, new leather seats/cuahions etc.

 

[SmoothLC]

Hey guys, I just picked up a 2000 Land Cruiser, Brown exterior with tan interior, and I wanted to get a new center console cover (shifter and 4x4 lever area)

I’ve noticed that everyone is just cleaning and repainting theirs, does anyone sell a 3D printed version or any overseas replacement parts?

Thanks!

The exterior of my cruiser is in great shape but I’d like to replace or fix lots of interior parts, door panels, new leather seats/cuahions etc.

Lots of threads on those subjects in the forum.

Do a search, find a recent one that's relevant to what you want to update/fix and post a response.

It will appear at the top of the forum and get a lot of visibility.

 

[Deflagrate]

I know there was one person who was 3D printing the shifter surround (part with the gear indicators), I feel like it wasn't Ben, but I can't remember for sure. I'm not aware of anyone printing the entire center console panel.

How many miles does your cruiser have?

 

[skepter]

I know there was one person who was 3D printing the shifter surround (part with the gear indicators), I feel like it wasn't Ben, but I can't remember for sure. I'm not aware of anyone printing the entire center console panel.

How many miles does your cruiser have?

I’ve seen the shifter surround as well, I think it’s on CruiserDM or something like that. I would like to try for the entire section if that’s around.

My cruiser is at 189k. If I pull all of the stickers off and repaint it would probably look ok, I’d just rather have a new piece instead of paint flaking off eventually!

 

[skepter]

Lots of threads on those subjects in the forum.

Do a search, find a recent one that's relevant to what you want to update/fix and post a response.

It will appear at the top of the forum and get a lot of visibility.

I’ve searched this subject a ton and I’ve only seen videos on YouTube, but it’s all sanding down the old plastic and repainting. Nothing about replacing.

And on this forum I haven’t been able to find anything, my post is the only thing that comes up!

 

[hoser]

It's not clear to me which part you want? You want to 3D print this entire console?

 

[Dparo]

I asked Delta if they had plans to do anything for these like they are doing for the 80 consoles (awesome work btw, this isn't a s*** on DVS before someone loses their mind) and was told that too many soccer moms are still driving the 100 for them to make definitive plans on development.

 

[skepter]

It's not clear to me which part you want? You want to 3D print this entire console?

pretty much the face plate without the cup holders. I’ve seen some nice 3D printed parts but not for the center console. Hopefully that makes sense

 

[hoser]

I see... I am guessing you want it to be functionally different than stock.... more button/pockets or something.

 

[skepter]

I see... I am guessing you want it to be functionally different than stock.... more button/pockets or something.

If it was the same functionally I’d be very happy with that, I’d love to have the interior look brand new again!