100 Rebuild

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Here is the ditch where i bent my exhaust
SSPX0069.jpg

resulting in this
SSPX0075.jpg


So here is my exhaust setup until i can fix it:bang:
SSPX0077.jpg


Good Fun!:cheers:
 
sry for the crappy cell phone pics and the size. Im at work and cant really play with them..damn customers keep coming in. lol
 
MEMCruiser said:
Newbies took most of the damage. Went to a couple of body places today. There goes my grand for the lift kit.
Click to expand...

take your inside door panel off and push it from the inside. I bet you can make it look good enough to live with. At least it looks like you use the truck for what it was made for and there will be many many more.

They are like scars.....They always have a story behind them.

I like the dent roll with it.

Put the grrr in the lift and make dent lower on the body...
 
Bomar said:
take your inside door panel off and push it from the inside. I bet you can make it look good enough to live with. At least it looks like you use the truck for what it was made for and there will be many many more.

They are like scars.....They always have a story behind them.

I like the dent roll with it.

Put the grrr in the lift and make dent lower on the body...
Click to expand...

How hard is it to take the inside door panel off? I have thought about doing that. I would really rather put a grand in the lift as opposed to a new door. Who wants to help with the lift project. I have no tools other than the basics.

Bomar, I went to Visual today and used your name. Thanks for the info. There was a real cutie behind the desk today and they were real nice.
 
MEMCruiser said:
How hard is it to take the inside door panel off? I have thought about doing that. I would really rather put a grand in the lift as opposed to a new door. Who wants to help with the lift project. I have no tools other than the basics.

Bomar, I went to Visual today and used your name. Thanks for the info. There was a real cutie behind the desk today and they were real nice.
Click to expand...

It should only be about 4 to 6 screws and then go around the edges and pop off the plastic door things.

No special tools needed. Heck a plunger on the outside might get some of it out. If you can get a good seal.

Ask Todd and Cameron for some help. They are always down for some truck work. Todd is the body man.

Yeah Toni at Visual is a cutie.
 
I have found a door that is same color as mine online for 750. It was from website that bill riley suggested. Anybody ever hung a door before?

I think I am going to order lift kit next week.
 
Hanging doors is easy. My old Cattywampus went for a few days without doors. They're heavy though... get friends. Some paneling will need to be removed near the kick panel i'm sure as to disconeect the electronics but nothing too crazy.
 
funny that this ride we did was the first time i met Cameron and his brother. Last night i found out that my wife works with Cameron's brother. Small world.
 
Jrock said:
funny that this ride we did was the first time i met Cameron and his brother. Last night i found out that my wife works with Cameron's brother. Small world.
Click to expand...

Not too ironic, only 1/4 of Memphricans work.
 
Jrock said:
funny that this ride we did was the first time i met Cameron and his brother. Last night i found out that my wife works with Cameron's brother. Small world.
Click to expand...

Who is she?
 
Charity, she works in the front answering phones and does the fees and costs. Brown hair, about 5'2". Also Jeremy is my cousin.
 
MEMCruiser said:
Wait. cameron and billriley are brothers? How did I miss that? I was not even drinking that day, even though my truck looks like I was.
Click to expand...

They are UNDER COVER brothers.
 
You must log in or register to reply here.

Share this page

IH8MUD Forum | Toyota, Lexus & Off-Road Community
Community platform by XenForo® © 2010-2026 XenForo Ltd.

© 2000-2026 Tie Rod Media LLC

Back
Top Bottom