- Thread starter
- #21
This was not easy
#10 Black to Green, bodywork and paint 62
- Thread starter kelly saad
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
Yep, I worked on Christmas. The roof is beat up on both sides. More previous damage on the passenger rear quarter, but no rust. someone recently backed the passenger taillight into something, thanks for that 
It may look like a lot of filler, but it’s actually very thin. It just has to be feathered out pretty far so you don’t see the repair. I work really hard to get the metal work straight so the filler is thin.
It may look like a lot of filler, but it’s actually very thin. It just has to be feathered out pretty far so you don’t see the repair. I work really hard to get the metal work straight so the filler is thin.
Last edited:
- Thread starter
- #23
I did get that dent pushed out above the taillight. I forgot to take a picture, but I didn’t just fill it with filler FYI 
I spy a Red/Gray 60 with Colorado tags!!! Woaooaoaoaoa...whats happening there??
Man! great work!Yep, I worked on Christmas. The roof is beat up on both sides. More previous damage on the passenger rear quarter, but no rust. someone recently backed the passenger taillight into something, thanks for that
It may look like a lot of filler, but it’s actually very thin. It just has to be feathered out pretty far so you don’t see the repair. I work really hard to get the metal work straight so the filler is thin.
View attachment 2876635View attachment 2876636View attachment 2876637View attachment 2876638
you do such a great job.
Thanks for posting, it is inspiring.
- Thread starter
- #26
- Thread starter
- #27
Comments like this mean so much to me, so thank you!
I spy a Red/Gray 60 with Colorado tags Woaooaoaoaoa...whats happening there??
well ****kkkkkkk ya I am!!!Someone is excited?!!!
thats it for pics...man, such a tease
I didn't want to ask...knew you had it handled. Also, wish I could find the idiot that backed it into the pillar at the ATM. D'oh!I did get that dent pushed out above the taillight. I forgot to take a picture, but I didn’t just fill it with filler FYI
- Thread starter
- #32
- Thread starter
- #33
Moving along. Almost ready for primer!! It’s not as easy as it looks
- Thread starter
- #34
@WSOPgold2012
Nicetires
- Thread starter
- #36
This is the 2nd or 3rd hatch I have seen that is cracked in the same place. Its really odd, and I cannot figure out how it cracks here. Welding it back together. It was rusty, so I sand blasted it first.
- Thread starter
- #37
Typical rusty A pillar gutters. These looked pretty clean, but I removed them anyway. I might just sandblast these and reinstall them.
- Thread starter
- #38
Ready for primer, almost anyway. The bodywork is mostly done, finally.
