hdj81

  1. ikarus

    SOLD UT: 80 Series JDM Running Boards + Mudflaps

    JDM running boards off my '97 HDJ81. Front mudflaps with the running board cutout included. Good shape. $300
  2. ikarus

    SOLD UT: 80 Series - OEM Radius Arms

    Radius arms off my '97 HDJ81. Caster bushings are relatively new with about 10K miles on them. Frame side bushings are looking a little tired. $100
  3. ikarus

    SOLD UT: 80 Series - Front Bumper

    Front bumper off my '97 HDJ81. Great shape. Includes frame brackets. $200
  4. bitdan

    SOLD Sarasota, FL - 1991 Toyota Landcruiser HDJ81. JDM Diesel.

    1991 Toyota Landcruiser HDJ81 Turbo Diesel. Right hand drive imported from Japan. This truck is super clean and original. I’ve replaced the starter and radiator. Paint is in excellent condition. Has a factory installed winch with original controls. Factory working refrigerated console with ice...
  5. D

    SOLD JDM RHD 80 series steering box

    RHD steering box off of a JDM 80 series, stock sector shaft, and in pretty damn good shape if you ask me, low miles, and never run dry. I pulled it so that I can have my frame welded up and braced, and already have a second box with the 105 shaft upgrade I’ll be installing once done. This...
  6. D

    SOLD Grass Valley, CA. WANTED: 80 series non-abs standard duty birfield joints

    In the middle of rebuilding my knuckles, and the splines on one of my birfs are looking pretty rounded off and bad. I figured I’d reach out and see if the mud folks had any stock spares in good shape after upgrading etc. Could be down for a set if you have both, and in desperate need so I can...
  7. Onlysixsyllables

    For Sale Location: Raeford/Ft Bragg, NC Year: 1995 Toyota Land Cruiser HDJ81

    1995 HDJ81, 142k miles, clean problem free with the coveted HD-FT engine. Center lock auto, front & rear dash Cam, JDM Head unit, alongside Australian RHD hard floor mats. Wood steering wheel (still have the OEM wheel) ~$38k obo Looking to sell because I was going to start building this one up...
  8. lilevo

    SOLD 1995 Toyota Land Cruiser HDJ81V

    Hello everyone, I have a 2AB Moonglow Pearl 1995 Land Cruiser VX Limited Diesel HDJ81 on the way from Japan to the west coast in mid January. The truck has 141k miles. Don't know if it has front and rear lockers until I get more pictures. Detailed Information and better pictures are limited at...
  9. Dmouse

    Dmouse's HDJ81 Build

    Hello Everyone! This is going to be my build thread where I document everything I do to my 80 Series. To start off this is a 1996 Toyota Land Cruiser with the 1HD-FT, with 215k km (~133k miles). Owned by a little lady in the JLPGA from Okayama, Japan. Here she is fresh of the boat with the...
  10. T

    For Sale Vancouver, BC 1993 Land Cruiser HDJ81

    4.2l Inline 6 Turbo Diesel 266,000km Imported from Washington State so she is US titled and ready for a return south of the border without any red tape paperwork/fees. -No accidents -Car VX Report available upon request --35” Patagonia tires -Sunroof -Wilco Rear Tire Hitch with full size...
  11. OutInCreation

    Picked up my 1991 HDJ81 today.

    It's going to be a fun project. Needs a bit of work. First things first, needs a new turbo. I'm reading mixed opinions on the Gturbo and definitely want to add the PDI intercooler/trans cooler. Any input will be much appreciated.
  12. kendgray

    SOLD Boise, ID - HDJ81 cruise control actuator or actuator linkage.

    Looking to retrofit cruise control into my '96 HDJ81. Would like to buy the entire cruise control actuator unit with the cable to injector pump (p/n: 88200-60011). Any cruiser control actuator from a RHD 1HDT HDJ80/81 from 08/1992 on should work. Thanks, Grayson
  13. buttercakes

    Early 1993 HDJ81 Dual AC + cooler/freezer recharge help

    How much R12 refrigerant at which pressure do I use after a vacuum has been pulled? Differing manuals provide differing information. The sticker inside the engine bay shows 1050g +-50g at 30kg/cm2 (high) and 10kg/cm2 (low) The 1990 FSM shows 1.500 ± 50 g at 14.5-15.0 kg/cm2 (high) 1.5-2.-...
  14. Cvan

    New member introduction

    Hello everyone, I just joined and thought I would introduce myself. I have a 1995 HDJ81 with the 1hdft with 208xxx km. I am new to the landcruiser platform but eager to learn more about it. I also have a 2004 tacoma I have modified into a overland rig and I'm excited to start changing up some...
  15. 96TrailSurfer

    Broken Power Mirror Fix

    So I smashed the LH mirror of my 97 HDJ81 on a branch and, in addition to cracking the wind deflector and breaking off a mounting tab for the turning signal, it broke the plastic receiver for the retaining screw of the power mirror that keeps it from falling out. To fix: 1. Take a M5 rivnut and...
  16. D

    SOLD 1hdt radiator(only 750miles), manual or auto, 16400-17020

    $400 Bought this manual radiator brand new from cruiser outfitters(paid $580 shipped) as there weren’t any automatic radiators available. Only put about 750 miles on it before pulling it and installing the correct automatic radiator in my 1990 HDJ81. Little bit of dust, a couple dead bugs...
  17. jurassic cruiser

    For Sale 1991 Toyota Landcruiser HDJ81 150k miles

    I am selling my 1990 Right Hand Drive, Turbo Diesel Toyota Landcruiser HDJ81. This Landcruiser has a California title and does not have to pass any smog requirements in the state. It was imported from Japan to Michigan by Steve at Landcruisers Direct and then I transferred it from Michigan to...
  18. Dmouse

    Wanted H151F for 1HD-FT

    Hello, I am looking to do a manual swap on my 1HD-FT. Let me know what you have. Thanks!
  19. D

    ARCHIVE 1992 Turbo Diesel Land Cruiser HDJ81: 108,000 miles, Triple Locked, Warn Winch, East Coast Bull Bar, Lift kit, Black Rhino Wheels & more in New Mexico

    This triple locked 1992 Toyota Land Cruiser HDJ81 is a Japanese-market example that we imported into the US in May of 2021 and sold in March of 2022. We recently took the truck in on consignment after the buyer upgraded to a modified 1HD-FT truck in our inventory. This fantastic example is now...
  20. 96TrailSurfer

    Help Identifying Panhard Bar and Bushings

    My HDJ81 came from Japan with an after-market dual-side adjustable panhard bar and a drop bracket. Can anyone identify the brand / model of this panhard bar so I can double check bushing size and determine if I can use an OEM bushing. My caliper measurement shows 38 mm ID, while I understand...
Back
Top Bottom