Recent content by tymbo

The video instructions are different and work. The instructions that I got from them didn’t work at all. Watch the video starting at the 3:51 and you can get it programmed. I was able to program my new key, but it seemed like it killed my old fobs ability to be programmed. I guess program...

I bought a new key from 1010keys and already have Techstream. I was able to program a new key with Techstream and when I went through the process to program the new key to unlock the doors, it took the program and I was ready to go.... i thought. I got out and tried to lock the door with the...

So just an update, I got everything installed with the Moog 81081 Springs. Drilled a hole in the middle of the Hockey Pucks and was able to install. I think I used 1.5" 1/2" bolt and nylon locking nut and a washer on each side of the hockey puck. Looking at other kits, you could probably...

Did you ever figure out how to get the lights off after your install. Same issue with mine as well. Pulled the fuses and I have the 3 lights on.

I have an 05 and the same thing is happening to me. Replaced the shocks and springs and I have the 3 lights you have on as well. Tried the ZPC and lights still on. I guess Im going to put the TEMS fuse back in and try it that way. The blinking off will annoy the s*** out of me, but at least...

Just doing some test fitting on my DIY coil spring conversion. Also doesn’t look like I’ll have to cut the springs any either. Energy Suspension 15.6103G RAMPED Coil SPRNG Isolator Set Moog 81081 Springs 2 hockey pucks Genuine OEM Toyota 48302-35040 Spring Seat Sub-Assembly Here are some...

Thanks for all the input. I have both springs sets on the way and will be sending the 81045's back. Ill update on the Hockey puck method as well. I have thinking about this method and will be making a sleeve for the hole because my luck, the damn thing would squeak like crazy if i didn't.

After all the reviews I have seen online I ordered the Moog 81081 Springs. One guy said that if you have a 3yr old and grocery's in the back it bottoms out with the 4runner springs (moog 81045). The guy above said he switched his 81045's out for Dobinson stock height springs as well because...

This is from another members post from another forum. But they posted that they used the 81045 springs with their conversion. 81045 moog by tymbo posted Dec 11, 2018 at 12:10 PM 81045 moog by tymbo posted Dec 11, 2018 at 12:10 PM

Thanks for the photo. I looked at ebay, but the shipping on most of them and the fact i need them this weekend left me with ordering from amazon since I have prime. I am under $250 for everything right now. I will probably have about $5 in hardware. When you installed your kit, did you have...

I've got an air leak somewhere and don't feel like band aiding the air ride system, so I have my order on the way for the conversion. I need to do it this weekend, and it seems like all the manufactured kits are 2-3 week run time before I could get them, so I have decided to make my own. I...

Have you installed this? I would like to know how the setup worked for you and which springs you went with. I am doing this this weekend and about to order parts. What springs did you end up with and how do you like them? I have them both in my cart and need to make a decision. I am...

XM radio installed? any wires going under the rear door seal? Also is that the same side as the ac condenser? Maybe a plugged line?

Ok good, next brake job I will get OEM and I assume that is what is on it now but I dont know. Being new to the Gx470, I have seen that you can replace the front Air shocks/struts without doing the rear?

Just picked up my 2005 GX470 with 143k miles and I find that the brakes seem very sensitive through the pedal. If i press on them, it wants to stop quickly without a cushy feel of other cars I have driven. I also get some nose dive as well. Its like the brake are too good. I do have the...