Recent content by TOMMY76

Did you get your window working?

Did you ever get your window working . I had the same situation with the relay buzzing even with the new switch.

Thanks All, I ordered an after market switch . Cheap enough to take the chance.

Thanks for the quick reply . I have it out and all contacts appear clean. Any thoughts on the best source for a new one? Thanks

2005 The passenger and two rear windows quit working from the driver master switch. They all still work from their individual switch . A couple of days later the driver window switch quit working. When I try the drivers window switch there is a buzzing sound coming from the switch assembly. The...

Has anyone ever used this module. EngineStat Classic - Carefree Classic Cruising! MP-ES-CLA .Looks like a good solution for a back-up to the 40 year old gauges.

My problem seems to be the fluid is not going to the rear wheels. Could it be the proportioning valve is stopping it?

finally able to get back to it. I hooked up the vacuum pump to the rear driver wheel,pumped it up to about 20 lbs ,loosened the bleed valve and NOTHING. It takes the vacuum about two minutes to go down, but the reservoir level does not move,repeated several times. Then with vacuum on the open...

thank y'all ,everything looks like its working ok and no bubbles. Now on to the wheels.Everything I read says do the furthest away wheel(driver rear) first but i have a vacuum pump I was going to use that says do the closest wheel first.Any thoughts on this? Thanks,again,Tommy

I am trying to "bench bleed" my master cylinder in my 1976 fj40. I disconnected the brake line and filled the reservoir. When I pumped the peddle nothing happened. Then after it set for a few minutes it started leaving the reservoir and coming out of the master cylinder where the brake line...

thank y'all, just ordered

can someone tell me if these are the same belts y'all were getting that are now sold out. www.ebay.com/i/222354760756?chn=ps . Thanks,Tommy

6 years later and still very helpful. Thanks for the great thread

do you have a kit for the roll bars