I've tried on FB and Reddit without much luck. I really need to get the dash back together before this weekends storm, so I might try doing the jumper technique.
I've got a 12/04 build date and a 60771 unit, but my driver's side only blows cold. My passenger side has full range of output air temps. I purchased a new servo and no luck. Any idea what causes this? Someone else recommended splicing the driver side into the passenger side. Not ideal, but...
Solved my own problem...ordered another TYTO-01 of Amazon, replaced the one from Crutchfield, et voila, sound!
There is a data signal that the TYTO generates to turn on the amp, per Crutchfield. I guess that was the one thing not working on my original part. I don't know of any way to test it...
The non-nav conversion adventure continues...
Vehicle is a 2005 w/nav. I've completed the non-nav conversion and it works great.
I'm trying to install a new head unit from Crutchfield with the TYTO-01 adapter. I cannot get sound out of the speakers. For some reason the amp is not turning...
Just figured it out..I'm using the wrong plug on the vehicle side. The correct plug (at least the one that fits) is part of the harness on the lower left of the radio that bolts into a bigger connection.
I just finished up my non-nav conversion and started on installing the new head unit. The setup I ordered from Crutchfield came with the Axxess TYTO-01 Wiring Interface, which I've read that other people are having success with. However, when I try to connect the wiring interface to the OEM...
As I'm preparing to dive into this project, I keep reading in the non-nav conversion thread that you need to set volume, fade, and balance before you install an aftermarket head unit. I don't remember if I did this when I installed my Teyes, and I don't have an OEM nav head unit. Do I need to...